GolfGTIforum.co.uk

General => The garage => Diagnostics - VagCom / VCDS => Topic started by: markgti1.8t on 14 April 2013, 21:09

Title: vcds-lite
Post by: markgti1.8t on 14 April 2013, 21:09

can i use vcds-lite  de-immobilise a ecu

Title: Re: vcds-lite
Post by: Dalo Harkin on 14 April 2013, 21:31

Are you using a cheap eBay dongle? If so then no, most won't even delete fault codes

Title: Re: vcds-lite
Post by: markgti1.8t on 14 April 2013, 22:15

Quote from: Dalo Harkin on 14 April 2013, 21:31

Are you using a cheap eBay dongle? If so then no, most won't even delete fault codes

i have the ebay cable working reading faults and deleting them as thinking of buying a mapped ecu so wondering if i could do it with vcds-lite

Title: Re: vcds-lite
Post by: Dalo Harkin on 15 April 2013, 13:03

It wont be deleting them, it will be removing them from the current list not deleting them.

No mate, you need someone with proper VAGCOM

Title: Re: vcds-lite
Post by: topher on 15 April 2013, 19:24

you won't need to remove the immo, AGU will be immo2 so you can just code the ECU to your immobiliser but you will need full vcds for that

Title: Re: vcds-lite
Post by: itavaltalainen on 15 April 2013, 22:50

are you using vcds lite a shareware or fully registered?
fully reg vcdslite should be able to do it for older pre-can cars.

Title: Re: vcds-lite
Post by: markgti1.8t on 18 April 2013, 20:41

would vcds release work