GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: lagrynfaya on 13 April 2013, 17:56

Title: Golf MK3 Door Wiring Removal
Post by: lagrynfaya on 13 April 2013, 17:56

Hello everyone, i am breaking a golf mk3 1.9d and i don't know how to remove the wiring of the doors i can see that there is a block connector on the frame (under the dash for the front) but i can't figure out how to remove it  :embarrassed: . Can anyone give me a bit of advice ??

Title: Re: Golf MK3 Door Wiring Removal
Post by: Len on 13 April 2013, 18:00

Pull away the concetina rubber sheath from between door and frame.
Oh yeah then you will see a big retaining knob, undo that and should come apart.

Title: Re: Golf MK3 Door Wiring Removal
Post by: lagrynfaya on 13 April 2013, 18:19

So when i do that it will free the block connector and it will come off with the door ?

Title: Re: Golf MK3 Door Wiring Removal
Post by: sharki786 on 13 April 2013, 21:05

Just unscrew it from the plastic huge nut bit on the door

Title: Re: Golf MK3 Door Wiring Removal
Post by: northeast_gti-t on 13 April 2013, 23:29

Quote from: Len on 13 April 2013, 18:00

Pull away the concetina rubber sheath from between door and frame.
Oh yeah then you will see a big retaining knob, undo that and should come apart.

Quote from: sharki786 on 13 April 2013, 21:05

Just unscrew it from the plastic huge nut bit on the door

/\ /\ /\ as said i found out this way easy to do though all the same  :wink: