GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: hardmonkeys on 06 April 2013, 09:30
-
Hi all,
Will a caliper from another trim model fit my car?? I know the turbo won't fit they have bigger discs, but if I see a 1.6 or sommut, will it fit..only reason I ask, is because my nearest scrappy is 30miles away, and I know they have Golfs but no GTIs
-
Golf 2.0 8v | 1.8 | TDI 115 | TDI 110 | TDI 100 | TDI 90 - 280mm - you need the hubs and discs, calipers and pads are the same.
Golf GTI 1.8T | Golf 130/150 TDI | Golf V5 150 | Seat Leon 130/150 TDI and 20VT - 288mm - you'll need everything! Hub, calliper, carrier, pads, discs, splash guards.
All this is a hell of a lot of work. Buy yourself some decent pads, discs and brake fluid, you'll find it makes a hell of a lot of difference!
-
Is he not on about the rears not the fronts mate ?
-
Yes..I know. I got pads and disc...it wasn't a conversion question lol...
I need a new rear caliper...and wanted to know if I need to,get,one off a GTi...or are most the same lol
-
I think the rears need to be off a gti mate as think they are a bit bigger but not sure mate
-
Cheers mate.
Got a unit from ECP...thought it'd be better than trying a unit off a scrapper
-
The rear discs are the same on pretty much other than the the 4 wheel drive variants and the Leon Cupra r, golf anni, and Octavia vrs.
-
I think all lower spec mk4's had the same rear brakes only the TDI 150 and Anni's had 256mm