GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: dan_thevdub_man on 23 March 2013, 22:10

Title: Heated seats loom how to fit
Post by: dan_thevdub_man on 23 March 2013, 22:10

Hi again. Anyone point me in the right direction for a guide how to fit and install the lo
For heated seats please

Title: Re: Heated seats loom how to fit
Post by: Shady Pioneer on 24 March 2013, 10:33

Read this bud:

http://www.golfgtiforum.co.uk/index.php?topic=187108.0

Should give you some insight.

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 02 April 2013, 20:17

Have a problem installing mine, someone has obviously cut a few connectors from the loom. I have a black and white wire coming from the seat end, where does this connect, can I splice it in to something else? Also a blue and grey one coming from the top pin on the connector that goes to the switch, again where can this go?

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 02 April 2013, 20:20

Were did u get ur loom from mate as im looking for one is it right for people to charge 100 pound for the loom

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 02 April 2013, 20:33

Got it with the seats just haven't got around to fitting it yet.

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 02 April 2013, 23:59

Think I've got it sussed now. Have wiring diagrams if anybody needs one.

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 03 April 2013, 09:56

Could u send that over please

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 03 April 2013, 10:13

Will upload them on to here a little later, dont have them on my work computer  :whistle:

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 03 April 2013, 14:07

Cheers mate

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 09 April 2013, 13:34

Any chance for tht diagram please mate ive just won a loom on ebay for 11 quid  :tongue:

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 09 April 2013, 15:57

If you have a complete loom it's pretty much plug n play, mine had been butchered. Will give more details later, about to leave work.

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 09 April 2013, 16:55

Cheers mate yeh its a complete loom the only wire thts been cut is the earth wire

Title: Re: Heated seats loom how to fit
Post by: thai-wronghorse on 09 April 2013, 17:57

Piece of piss then.

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 09 April 2013, 18:11

So its just connect some plugs plug into seat and away u go warm bum

Title: Re: Heated seats loom how to fit
Post by: Callum_K on 10 April 2013, 08:21

Pretty much. Plug in to the seats, run the loom undre the little inner sill plastic panel and up behind the dash. You'll need to take out the clocks to wire it in. Partway up the loom should be 3 wires with plugs on end. Brown plug is earth, plugs in to a big round connector thingy on the A pillar but if it's cut just join it to any other earthing point. Behind and to the right of the clocks you should see a small block of different coloured connectors, your other two wires plug in here. Should be a black/white wire with green plug if I recall, plug in to the green one, this is your switched 12V. Blue/grey with blue connector goes in to the blue, this is your illumination.

Should all work as long as you have the relays and gubbins under the seats!

Title: Re: Heated seats loom how to fit
Post by: xionsolaris on 10 April 2013, 08:26

Cheers mate yeh all the seat electrics are there i hope the seats dont stink when heated up lol