GolfGTIforum.co.uk
General => General discussion => Topic started by: murraymint on 17 March 2013, 11:48
-
(http://i1106.photobucket.com/albums/h364/murrayminf/DSC_0078_zpsf64f1f9a.jpg)
(http://i1106.photobucket.com/albums/h364/murrayminf/DSC_0077_zps78b3e321.jpg)
-
Niiiice!
Finished doing what to it by the way?
-
Cheers, we've hande made the whole ally body onit, got it in September
-
Needs air...................
-
Yes it does! I did say but the boss wasn't impressed :laugh:
-
what , from sheets of ali . that takes some skill :wink:
-
what , from sheets of ali . that takes some skill :wink:
Yh :afro:
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
Face and indeed palm
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
Face and indeed palm
:laugh: :whistle:
It's going to the assen? Show in Germany will we fitted with engine, interior, chrome trim etc. but will be shown in bare ally to show customers the work gone Into it and show there's no filler init
-
Nice work, I've painted a couple of Continentals in the distant past, one in Regal red, and the other in Old English white, both cars were imported from New York, by a local to me RR/Bentley dealer, and ended up sitting in a RR dealership showroom for about 2 years! iirc both cars ended back in California in the mid 90's
Panel work looks great, but its as much to do about how it feels, shut lines, door gaps etc, thats the difficult bit!
Where are you based?
Thom
-
I'm in north Devon, work here
http://www.ndmetal.co.uk/
Spend the last week sanding it down getting to feel nice to the hand. The door shuts were set to a unform gap the whole way round, hopefull when it's painted they will only need high build primer then paint, no filler
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
Is he serious?...... :shocked:
-
Wow, beautiful! I'll have to show your website to my other half he loves this sort of stuff.
-
Wow, beautiful! I'll have to show your website to my other half he loves this sort of stuff.
Thanks! :afro:
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
Is he serious?...... :shocked:
.....Swindon.....
-
dont mean this is a bad way, but doesnt look finished to me.
Is it going to be sprayed?
Is he serious?...... :shocked:
.....Swindon.....
Watch it you!
-
That class, You might just have the best job on here in my eyes.
-
That class, You might just have the best job on here in my eyes.
:smiley: :afro:
-
That class, You might just have the best job on here in my eyes.
I wax pornstars fanny's for a living. I win!
Seriously impressed with the 'unpainted' finish too. Good skillz.
-
Was the body formed over a Buck, or were the panels replaced one by one?
Thom
-
Was the body formed over a Buck, or were the panels replaced one by one?
Thom
We got it with just the inner tub. The roof and bonnet was wheeled up by eye. Then the wings and doors we beaten and wheeled over solid bucks. That class, You might just have the best job on here in my eyes.
I wax pornstars fanny's for a living. I win!
Seriously impressed with the 'unpainted' finish too. Good skillz.
That does sound like a good job :laugh: thanks :afro:
-
MOST impressive! :cool: