GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: turbokid23 on 12 March 2013, 18:24
-
I've just fitted a boost gauge but not clued up with wires it's got 3 wirers a black, red, orange where it how do I conect them??
-
Should be some instructions??
There is earth, live and switch....I think haha
-
Think it is
Black - ground
Red - 12v ( inlet to headlight switch)
Orange - 12v (outlet of headlight switch)
-
black > black or earthing point
Red > blue/grey wire
orange > not used.
-
3 wires?? my newsouth came with only two, ground and live :huh:
-
i think the third one is to make it brighter when the headlights are on....maybe haha
-
Will I need to use the orange one as its a smoked face one?
-
what make is the gauge?
-
the live wire goes into the back of dimmer with a splicer on mine and works fine
-
Can't tell you the name as its smoked screen :) I only payed £5 for it with all the pipes and wires but witch wire goes were?? Pics would be better as I'm a bit silly :)
-
black > black or earthing point
Red > blue/grey wire
orange > not used.
This the rite one then?? As ill go and have a play
-
as its smoked id say connect the orange to the yellow wire (ignition) so you dont need to switch your lights on to see the boost gauge.
-
as its smoked id say connect the orange to the yellow wire (ignition) so you dont need to switch your lights on to see the boost gauge.
+1 this is gonna be a better idea than having it on a switch
-
I've just put it on a switch at the mo till week end as its freezing out side, orange to the yellow?
-
yea, if not you will have to switch your lights on to illuminate the gauge.