GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: LakerLover on 08 March 2013, 14:56

Title: Rear standard Valance
Post by: LakerLover on 08 March 2013, 14:56

Is it as straight forward to remove as the front! Any tips? 

Title: Re: Rear standard Valance
Post by: thatwillis on 08 March 2013, 17:31

Yup yup, guessing you havent had a look yet then  :laugh:

Title: Re: Rear standard Valance
Post by: dom on 08 March 2013, 17:51

There are 2 or 3 wheel arch liner torx headed screws to be removed, this can be done without removing wheels with the right torx bit and a small ratchet.

There are also 2 torx bolts underneath the valance either side and then it just pulls out from the bumper as if its slotted in.