GolfGTIforum.co.uk
General => The garage => Topic started by: kingaz on 08 March 2013, 14:43
-
Spoke to a few people and theyre telling me agu ecus cant be remapped :/
Buttt i rung rtech and said what car it was and they said yeah its fine to do a custom remap.
Bit confused
-
listen to r-tech they should know im sure they have done plenty :smiley:
-
Your friends must have been smoking crack at the time of telling you that.
-
Lmao, suppose they r partial to a bit of crack!
Nah om a serious note iv read a few times that they can be done. But yeah rtech r gna know alot more than some others
-
An AGU can be remapped but since they have a KO3 (not S) turbo you wont see more then 190 brake generally speaking.
The KO3s is a straight swap turbo so if you want more power its best to invest in one of those with mods then get a remap to see up to 240-245 at top whack.
Hope that helps mate :)
-
An AGU can be remapped but since they have a KO3 (not S) turbo you wont see more then 190 brake generally speaking.
The KO3s is a straight swap turbo so if you want more power its best to invest in one of those with mods then get a remap to see up to 240-245 at top whack.
Hope that helps mate :)
Yeah got a k03s coming on the 20th.. gna buy a fmic this week, 3inch maf and decat then being remaped in april. Rtech said ill b looking at 230bhp
-
I hope they can be remapped, I've had 3 maps from R-Tech on mine lol
-
An AGU can be remapped but since they have a KO3 (not S) turbo you wont see more then 190 brake generally speaking.
The KO3s is a straight swap turbo so if you want more power its best to invest in one of those with mods then get a remap to see up to 240-245 at top whack.
Hope that helps mate :)
Yeah got a k03s coming on the 20th.. gna buy a fmic this week, 3inch maf and decat then being remaped in april. Rtech said ill b looking at 230bhp
I would have thought you would have needed a few more things, new dv, induction kit, exhaust system. Im not a tuner but I have been through the whole new engine buying mods and remapping....either way, good luck!
-
Yeah got exhaust and induction kit on. Do need to purchase a forge dv and forge actuator though
-
I hope they can be mapped as Rteck did mine last year and Im getting it remapped stage 2 this year...
-
I hope they can be mapped as Rteck did mine last year and Im getting it remapped stage 2 this year...
What bhp is urs running??
How much was ur remap? I was quoted 290...
-
£290 will be right.
Cant beat a R-tech map....fact.
-
If I'm correct the only difference between mapping an agu to any of the others is the ecu in the agu is non obd comparable (can't be mapped through the obd port) and has to have the ecu removed and chipped. The chip then makes it obd comparable and can then be re-mapped
If I'm wrong please feel free to correct me ;-)
-
Stop panic in you have rung the man who can Rtech all the way mate :smiley:
-
Yeah i know mate, this is an old thread lol. Will bell u later on