GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Mk2_tel on 05 March 2013, 14:57

Title: Fitting my tt comps
Post by: Mk2_tel on 05 March 2013, 14:57

I have a tdi130 on Coilovers
Is it worth putting spacers on rears or even front or better look?
If so what is the max width spacer I can go before needin longer wheel nuts cheers

Title: Re: Fitting my tt comps
Post by: beppe2672 on 05 March 2013, 15:43

Ideally you should use longer bolts with any spacers.

Title: Re: Fitting my tt comps
Post by: cullygti on 05 March 2013, 20:59

to answer your question any spacer over 5mm will need longer bolts upto 5mm you can use your standard bolts  :smiley:

Title: Re: Fitting my tt comps
Post by: mcgee9t2 on 05 March 2013, 21:15

<5mm standard bolts.
>5mm longer bolts.

as for do they need spacers. i havent got spacers on mine and my tt comps sit flush with the arches.

depends on what look your going for, if your going for the typical "sceen" streched tyres, stupidly low with sh!t handling then yes maybe 5/10mm front and 10/15mm back

Title: Re: Fitting my tt comps
Post by: Benny.banks on 05 March 2013, 21:29

Unless there the bolt on hubcentric kind of spacer then you can use your standard wheel nut.

Title: Re: Fitting my tt comps
Post by: cullygti on 05 March 2013, 21:30

Quote from: Benny.banks on 05 March 2013, 21:29

Unless there the bolt on hubcentric kind of spacer then you can use your standard wheel nut.

very good point there dude   :wink:  :cool:

Title: Re: Fitting my tt comps
Post by: Mk2_tel on 05 March 2013, 22:05

Lovely cheers for that guys thought rears might look
Bit small in them big arches but ill give it a go thanks again