GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: asboGTI on 04 March 2013, 10:01

Title: me7.5 ecu plus head with VVT
Post by: asboGTI on 04 March 2013, 10:01

right so i have been looking at this for awhile can someone clarify what is actually needed for the conversion am interested in doing the conversion by adding in EGT as suggested by prawn on another thread.

so questions are

what is needed?
what heads have VVT?
how hard is this to do?

Title: Re: me7.5 ecu plus head with VVT
Post by: Benny.banks on 04 March 2013, 11:06

think you need the loom, sensors, ecu plus mapping

Title: Re: me7.5 ecu plus head with VVT
Post by: asboGTI on 04 March 2013, 11:34

i knwo it will need mapping to get everything running right but i need to get it all set up first

Title: Re: me7.5 ecu plus head with VVT
Post by: golfyste on 04 March 2013, 18:08

I am doing this on the track car.
Aum/auq/bam/amk have vvt
Converting from a arz - You need the head, cams, wiring, Ecu, lambda with loom,

For egt I'm guessing you need the bam sensor and loom

Title: Re: me7.5 ecu plus head with VVT
Post by: asboGTI on 04 March 2013, 18:16

Right that's now a shopping list for me how easy would this be

Title: Re: me7.5 ecu plus head with VVT
Post by: golfyste on 04 March 2013, 18:19

Can't imagine it's too hard
Will let you know when I hve done it  :laugh:

Title: Re: me7.5 ecu plus head with VVT
Post by: asboGTI on 04 March 2013, 20:02

Ok well mine's gonna be a slow drawn out process due to lack of funds and possible not being in the country from the end of march to the end of September