GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Tomonator1985 on 25 February 2013, 10:07
-
Hi,
just a quick one,
Do all seats from a 5dr fit into a 3dr..?
cheers!
-
The fronts will fit but won't tilt.
-
of course!!!
but rears fit fine with the same fixings?
-
but rears fit fine with the same fixings?
Absolutely.
-
This wknd I fitted front and rear seats from a 5dr into my 3dr. They all fit fine and to make the front seats recline you can just remove a securing plate (one screw) from the left-hand side of the seat and then with your hand pull the hook on the other side of the seat (easily done when sat in drivers seat but a bit of an arse if getting in the passenger side). So if you have any friends they can still get in.
3dr seats have 2 hooks and when i get chance i'm going to see if one can be transfered from my old seats as i'm not overly keen on the securing plate thingy being undone and the seat only being locked in with one hook. I have only removed the passenger side plate so the drivers side doesnt recline.
HTH
-
FYI...
Fitting 5 door seats and having a rear bench fitted to your 3 door would be a MOT failure if the tester finds it when testing the seat belts...
way round it is to take out the bench when MOT time comes...
-
I was under the impression you could take the seats apart and fit the cable reclining mechanism from 3 door into 5 door, fairly easily. Have i been mislead? I was thinking of getting some new seats very soon, and was going to get 5 doors, but i wont if they cant tilt!
-
I was under the impression you could take the seats apart and fit the cable reclining mechanism from 3 door into 5 door, fairly easily. Have i been mislead? I was thinking of getting some new seats very soon, and was going to get 5 doors, but i wont if they cant tilt!
yes you can indeed
-
I was under the impression you could take the seats apart and fit the cable reclining mechanism from 3 door into 5 door, fairly easily. Have i been mislead? I was thinking of getting some new seats very soon, and was going to get 5 doors, but i wont if they cant tilt!
yes you can indeed
Is it particularly difficult? I stripped my seats recently to make new covers (fairly easy) but basically the donor car was shunted or something, the whole seat is bent, hence wanting new ones...
-
its just 2 cables. 1 short & 1 long, plus the lever mechanism, all the guides etc are already on the seat frame. hardest part is getting the seat covers on & off, rest is straight forward
-
its just 2 cables. 1 short & 1 long, plus the lever mechanism, all the guides etc are already on the seat frame. hardest part is getting the seat covers on & off, rest is straight forward
Im slightly puzzled now, my new 5dr seats have one hook to release them and a small plate to stop them reclining. The seats that were in the car when i bought it, i believe, are converted jetta seats (although not 100%) and these have two hooks to release the seat. Have u come across this?
-
proper 3 dr seats have 2 hooks.
5 dr have one hook and a plate with a bolt holding them in place.
sounds like you may have a set of corrado seats..
-
(http://i706.photobucket.com/albums/ww69/E30adz/RankseatsJetta.jpg)
(http://i706.photobucket.com/albums/ww69/E30adz/IMG_2904_zps43cb4e66.jpg)
These are my old seats. Lovely aren't they!!!
The rears seemed to fit the same as golf ones with no mods. I thought corrado ones needed modifying?
The reason i thought they originally came from a 5dr is the release mech's dont look standard. Where the handle is was a mess and the wire in the seats looked bodged in as was connected with chocolote block style connectors.
Could the bases have been swapped for three door ones meaning it would have 2 hooks?