GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: 67buggers on 24 February 2013, 22:50
-
Head unit has died....i was listening to it and it just turned off....checked the head unit fuse and the fuse box and both ok!
-
flat battery? :evil:
-
Negative...over
-
any smoke came out the back of it???
-
What HU is it mate? Is it running off the standard wiring loom or has it been cut into at any time, as in electrical tape, connector blocks etc?
-
Its a sony xplod....its pluged.into.the original harness and no.cut wires....i took the head unit to a repair.shop.today who.have had it running and said.its fine so it has.to.be car wiring end
-
Check it has 12v both permanent and ignition.
I have a feeling the ignition live has failed.
-
Its a sony xplod....its pluged.into.the original harness and no.cut wires....i took the head unit to a repair.shop.today who.have had it running and said.its fine so it has.to.be car wiring end
Do you live near Milton Keynes mate as more than happy to have a look.......I am not bad with electrics, mechanical stuff and I don't have a clue!
-
One way to get it working is by giving it a direct feed from the battery mate with an in line blade fuse holder.
So.......
http://www.ebay.co.uk/itm/AUTOMOTIVE-SINGLE-CORE-ELECTRICAL-CABLE-RED-17-Amp-4-M-/370755248526?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5652bc218e
http://www.ebay.co.uk/itm/AUTOMOTIVE-SINGLE-CORE-ELECTRICAL-CABLE-RED-17-Amp-4-M-/370755248526?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5652bc218e
Use the earth wire from your loom and the above direct to your HU power wire. I always like to solder and wires then heat wrap them so nice and secure. Also the fuse used in the Ebay ad' is a 30, I would use a 20.
-
Random one, and might help you might not. But my old head unit used to do the same, it was a blue wire on the back onit that had a 'mute' label onit, that used to short again the unit and turn off the hu. Put some tape onit and never happened again. Jus sayin :wink:
-
Could be dodgy ignition switch ?
-
Could be dodgy ignition switch ?
Looks that way, I've bypassed the ignition switch and it now works.....just gotta ding out why now!