GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: TGarrett123 on 17 February 2013, 12:54

Title: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 17 February 2013, 12:54: HI EVERYONE :grin:

I've got a 2002 mk4 1.8T golf:

AUM engine code.
Stock EVS Gearbox.
Single mass uprated flywheel conversion.
Uprated clutch.
Uprated forge actuator with blue spring.
Bailey recirculating dumpvalve
4 bar fuel regulator.
NGK Iridium sparks.
3" High flow Full cat back miltek system.
3 1/2" high flow de-cat.
3" Cold air induction kit.
FMIC capable of 450bhp.
Uprated Cupar R fuel pump.
Relocated map sensor.
Boost gauge.

Am looking into upgrading to gt28rs turbo.
Wondering if anyone know what else il need and have
Any tips ..

Cheers
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Chris#101 on 17 February 2013, 13:49: Rods and LSD at least :wink:
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: beppe2672 on 17 February 2013, 15:24: Bigger injectors?!
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 17 February 2013, 17:20: Cheers, could you send me a link on what sort of rods n that i should be looking at?
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: beppe2672 on 17 February 2013, 17:42: The integrated engineering rods get used alot and seem to be pretty damn good. Not sure what wrist pin size you'll need though for your engine code. Here's the link http://www.jbsautodesigns.co.uk/listing/30/rods
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Wazzzer on 17 February 2013, 18:52: 19mm
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 18 February 2013, 18:08: i dunno what turbo to get.......
Gt28rs or k03s hybird :sad:
Any ideas???
Cheers :smiley:
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Chris#101 on 18 February 2013, 18:58: roughly how much have you got to spend for a set up?
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Toby on 18 February 2013, 19:42: Quote from: Chris#101 on 18 February 2013, 18:58
roughly how much have you got to spend for a set up?

Buy the best you can afford!!

But it all comes down to the tuner!!

R tech ftw!
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: asboGTI on 18 February 2013, 20:39: I agree with Toby best set up I can afford is a k03s hybrid so that's what I am going for
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 18 February 2013, 22:36: around 2000£, i got k03s now but dunno if i should hybird or get a gt28rs.
I been told that hybrid k03 is better thn the hybird k03s? True?
Cheers
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Chris. on 18 February 2013, 22:43: Hybrid K03s would be a fine blower. Look at myles.

With 2k, GT28rs is realistically out the window...to do it properly would need a bit more.

Hybrid K03s, WMI and R-tech TIV+ mapping and be onto a winner.
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 18 February 2013, 23:03: what sort of power will the k03s hybrid push out?
And with the set up i got atm will there be anything i need to
do too make a k03s hybrid run safely
Cheers
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: asboGTI on 18 February 2013, 23:17: All depends on who does the hybrid tbh with you i have herd anywhere between 230 to 300 bhp but others will quote diffferent btw thats what i have heard not seen before this gets taken the wrong way
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: TGarrett123 on 18 February 2013, 23:46: what company do you reakon best to get it done?
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: Chris#101 on 19 February 2013, 20:13: Depending on the hybrid spec any bhp is possible providing you have the right hardware to back it up.

Dan- Beach buggy turbos is the man :wink:
Title: Re: HELP WITH TURBO UPGRADE PLEASE....
Post by: asboGTI on 19 February 2013, 22:38: Littco aka black widow turbos aka beach buggy turbos Dan I'd a god when it comes to turbo he rebuilt prawns when it went tits up