GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: dom on 17 February 2013, 12:29
-
Just want someone to confirm this for me, found oil in my spark plug chambers and on coil packs earlier:
(http://i790.photobucket.com/albums/yy183/codling1234/IMAG1285_zps0455aed8.jpg)
(http://i790.photobucket.com/albums/yy183/codling1234/IMAG1284_zps165ff246.jpg)
I'm assuming it's the valve gasket that is perished? If so I'll get a new gasket and rocker cover gasket tomorrow from ECP.
Has anyone used loctite gasket sealant before? I'm assuming that I'll need to use some with the new gasket?
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_173106_langId_-1_categoryId_255217 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_173106_langId_-1_categoryId_255217)
-
Yep id say gasket although might be worthwhile checking the rocker bolts are all tighted down just in case of any loose bolts.
I always like to use sealant on any gaskets i replace just to make sure it seals first time!
-
On closer inspection the gasket is visibly damaged (you can just about make it out at 7 o'clock in the picture I posed above).
Will the gasket sealant I posted above be ok to use with the replacement gaskets?
-
I'd use hylomar mate!
-
pretty sure it was loctite sealant i used when i done the rocker cover gasket on the old mk3 ,never had a problem with it
-
I would not use sealant, clean the faces and then use a new gasket plus torque bolts to spec.
-
I didn't use any sealant either
-
Good stuff, any tips Wazzzer? Going to pick the gaskets up soon
-
Yeah don't use sealant Dom could dry and then drop inside the engine then blocking up the pick up pipe
-
It's really easy mate, the gaskets locate on the head, just don't tighten the bolts down too much
-
I did my rocker cover gasket few weeks ago Dom didnt use any sealent. Same problem oil in number 3 use genuine gasket sealed perfect no oil in number 3 now :smiley:
-
Cheers, I got it changed over earlier in the week. The biggest pain was the hardlines getting in the way of removing the rocker cover :grin:
-
You done your oil pick up pipe yet Dom?
-
You done your oil pick up pipe yet Dom?
Nope, going to do it along with cambelt & waterpump, get it all done at once. Just need matt to order the parts and then a spare weekend!
-
Yeh that was a bugger for me but a small crow bar came in handy lol