GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: danmusic24 on 16 February 2013, 18:35
-
would mk2 coilovers fit mk3 16v?
-
they do with mk3 mounts
-
even without mk3 mounts they will fit (most of the low mk2's now use the vr6 spec mounts)
-
horrible squeaking noise from rear mounts after fitting coilovers??????
-
horrible squeaking noise from rear mounts after fitting coilovers??????
Are they new top mounts?
A bit of grease up there will eliminate it.
-
horrible squeaking noise from rear mounts after fitting coilovers??????
Rear mounts upside down? I have seen this and it is easily done.
-
new febi mounts front and rear,will check to make so i fitted mounts correct way as the back still feels likes its swaying a bit and squeaking...could do with a pic of correct way fitting rear mounts onto coilovers if anyone has one?
-
Rear end is swaying and squeaking?
I bet the coilovers are used?
Sounds like its leaked its fluid. I hope I'm wrong though and they are new
-
They do sometimes squeak if they are not tightened down enough.
-
do you use the long spacer washer from old shocks when fitting coilovers?
yes they are second hand but newish if you know what i mean,no fluild leaks..
-
I used the spacer washer on mine and they've been fine for almost a year now.
-
That could be it.