GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: Nige BCS on 12 February 2013, 10:49

Title: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Nige BCS on 12 February 2013, 10:49
Hi Guys
In order to further our aspirations in the GTi MK6 market we would like to take some fresh pictures of our system on a customers car...
We would also like the opportunity to explore the possibility of a new and unique tail pipe design.
Anyone who is familiar with our work and quality from the MKV forums will bear out this opportunity and the value it represents.
We are prepared to offer a forum member a 30% discount off our retail price for any of our MK6 systems in return for using the car to promote our system.
http://www.powervalve.co.uk/vw/golf/golf-mk6-2-0-tsi-gti-2008.html
Of course all identification marks will be removed, such as the reg plate.
In addition we will do the install foc.
Many thanks
Nige
BCS Automotive Limited
www.powervalve.co.uk
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: LukeRhino on 12 February 2013, 12:48
Pm'd you :)
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Ginge 35Edition on 12 February 2013, 19:35
Would love to do this especially before the show season starts! Just don't have the funds at the moment. I love the look of the power valve on this. Might have to pop along as your only ten minutes from my in laws.

Nige, what is the tip design your playing with?
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 12 February 2013, 20:31
Hi Ginge
We tooled up a totally unique 100mm tip with a 40 degree mitre (putting a rolled edge on a 15-20 degree mitre cut is tricky - 40 degree is  :laugh: :laugh: :laugh:)
We use this design currently on the Focus RS II
http://www.powervalve.co.uk/ford/focus/focus-rs-turbo-mk-2-2009/ford-focus-rs-turbo-mk-2-2009-catback-system-stainless-4-00-trims.html
and the Seat Leon Cupra R.
http://www.powervalve.co.uk/seat/leon-cupra-r-2-0-t-fsi-2010/seat-leon-cupra-r-2-0-t-fsi-2010-catback-system-twin-stainless-4-00-trims.html
The idea is to have the trims following the form of the rear valence perfectly, a bit like we did (again uniquely) with the 80mm 35 degree tims on the Golf V
Cheers Bud
Nige
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Ginge 35Edition on 12 February 2013, 20:42
They look epic mate!
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 12 February 2013, 20:58
Would do on an Ed35 bud  :wink:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Ginge 35Edition on 12 February 2013, 21:00
Would do on an Ed35 bud  :wink:

Tell me about it, but Mrs Ginge ain't taking the bait at the moment! Even with the discount carrot being dangled!
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 12 February 2013, 21:09
I agree, getting a green light from the war dept is getting harder and harder  :cry:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 13 February 2013, 05:38
Liking the look and sound of this  :smiley:
How long would you need the car for, i presume you have already got the system sorted ? is it just the tailpipe design you are after playing with and perfecting ?
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 13 February 2013, 09:52
Hi Neil
Yes the system is all sorted - we would just need the car for the day - pictures etc and to try the new trim option  :wink:
Cheers
Nige
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: MBCGTI on 13 February 2013, 13:35
Would love to but seeing as your based in St Helens its a little bit far away.
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 13 February 2013, 15:03
Ouch -  t'ts windee up'th north  :grin:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: mwad gti on 13 February 2013, 15:29
Must admit I would be interested but I am too far away.......
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 13 February 2013, 15:42
Nige
Pm me your number and will give you a call  :smiley:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 20 February 2013, 18:55
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Captain caveman on 20 February 2013, 21:25
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 21 February 2013, 05:57
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Mr GTD on 21 February 2013, 10:36
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?

You are correct Sir....
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Captain caveman on 21 February 2013, 15:04
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?

Yeah I realised after I posted that I couldnt message, teach me for not posting over last 6 months lol.

Paul
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Jimble on 21 February 2013, 18:17
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?

Yeah I realised after I posted that I couldnt message, teach me for not posting over last 6 months lol.

Paul

One more!! :whistle:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 21 February 2013, 18:52
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?

Yeah I realised after I posted that I couldnt message, teach me for not posting over last 6 months lol.

Paul

One more!! :whistle:

You took the plunge aswell  :smiley:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Jimble on 22 February 2013, 11:11
Deal done with BCS today  :smiley:

So soon for sale will be:
Full Turbo Back Milltek racing system, 100 cell cat, Black ceramic tailpipes, (Cost £1400) looking for around £700  :smiley:

Nice one mate glad someone took the plunge. If it wasnt other side of the UK id have snapped at the chance lol. Ive sent you a message regarding you Milltek as deffinatly interested in getting a new system for the GTI  :smiley:

Paul

No message Paul  :sad:
I think you need 10 post before you can pm ?

Yeah I realised after I posted that I couldnt message, teach me for not posting over last 6 months lol.

Paul

One more!! :whistle:

You took the plunge aswell  :smiley:

No mate, i meant paul only needs one more post so he can PM you, no point me spending any more on mine cos i'll most likely be ordering a 7 when the books open. :drool:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 22 February 2013, 12:20
^^^^ Haha
I read that the wrong way  :embarrassed:
No mk7 Gti for me, decided to keep mine until the mk7 R is released and the new M series beemers, will decide from there  :smiley:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Raffe on 22 February 2013, 13:33
What's the reason for the change from Milltek to the BCS system Neil?

Performance, aesthetics.....just curious.  :smiley:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 22 February 2013, 18:20
I like the idea of a stock sounding system off boost and when on boost a valve opens in the exhaust and sounds like a group b rally car  :smiley:
Also creates more low down torque, and I like the idea of having something different from the norm,
I have also requested black tailpipes again  :cool:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: wigit on 22 February 2013, 18:59
I like the idea of having something different from the norm

i get where you are coming from  :wink:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Raffe on 22 February 2013, 20:29
I like the idea of a stock sounding system off boost and when on boost a valve opens in the exhaust and sounds like a group b rally car  :smiley:
Also creates more low down torque, and I like the idea of having something different from the norm,
I have also requested black tailpipes again  :cool:

Sounds good :cool:
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Nige BCS on 15 March 2013, 11:01
Neil's fantastic 6 in the workshop this morning - pictures to follow later today  :smiley:
Title: Re: Neil's BCS Powervalve GTi MK6 system fitted...
Post by: Mr GTD on 15 March 2013, 14:30
 :cool: looking forward to it...
Title: Re: Anyone interested in a BCS Powervalve GTi MK6 system?
Post by: Neil gti on 15 March 2013, 20:05
Neil's fantastic 6 in the workshop this morning - pictures to follow later today  :smiley:

Come on then Nige get them pics up  :smiley:

The quality and fit is absolutely spot on really really pleased with it, on the motorway at cruising speeds you cannot hear it above the road noise, but once on boost all hell breaks loose   :laugh: but in good way not a Chavey sound, a proper blokes exhaust note !
I really liked the Milltek  but this is in a different league,
Well done on developing a great quality system for the GTi and its also nice to see a company who is passionate about its products and service,

Enough of all that   :grin: where's the pics
Title: Re: Neil's BCS Powervalve GTi MK6 system fitted...
Post by: Jimmymature on 15 March 2013, 20:40

You know the rules, pictures or I report this to the mods as a lie :evil:

Pictures, Pictures, pictures.....


Jim
Title: Re: Neil's BCS Powervalve GTi MK6 system fitted...
Post by: Neil gti on 15 March 2013, 21:00

You know the rules, pictures or I report this to the mods as a lie :evil:

Pictures, Pictures, pictures.....


Jim

Oh it did happen Jim  :wink:
+ DSG gives snap crackle pops  :laugh:
Title: Re: Neil's BCS Powervalve GTi MK6 system fitted...
Post by: Nige BCS on 15 March 2013, 22:06
Big thanks to Neil for bringing your 6 in today and allowing us to develop the new trim style for the Powervalve system.
Top bloke with a top car  :cool:

Here are a few pictures of the install as promised - The BCS Powervalve variable tone boost actuated performance exhaust system...

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6zzzzzzzzzzzzz_zpsdc6824fa.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6p_zps648efd37.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6t_zps1c41aa5e.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6q_zpsadb4fc13.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6y_zpsc2f7eaca.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6zz_zps07bccb72.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6zzzzz_zpsd4fac39f.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6zzzzzzzz_zps8d63b018.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6a_zps3b053a34.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6f_zps4b122677.jpg)

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf GTi MK6/BCSVWGolfGTiMK6o_zps189d7da1.jpg)

Thanks again Neil
Video coming soon...
Cheers
Nige  :wink:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Rhyso on 15 March 2013, 22:17
 :cool: :cool: :cool:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Neil gti on 15 March 2013, 22:22
Tailpipes don't look that colour now after a fun 100 mile drive home in the rain  :whistle:
Cracking pics Nige
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Booth11 on 15 March 2013, 22:41
 Looks :drool:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Ginge 35Edition on 16 March 2013, 05:57
That's looks ace, looking forward to the vid.
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: MAW73 on 16 March 2013, 07:16
Those exhausts look fantastic. The sound must be epic.

I'm liking the black gloss diffuser also.
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: charlie on 16 March 2013, 07:41
Very nice indeed :cool:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Raffe on 16 March 2013, 08:04
Looks great Neil, get that sound clip up :evil:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Jimble on 16 March 2013, 10:08
Very nice indeed! And how clean is your car underneath?? :shocked: :cool:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Mr GTD on 16 March 2013, 10:55
That looks stunning Neil.. :cool:

Looking forward to the vid...
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Neil gti on 16 March 2013, 12:54
Very nice indeed! And how clean is your car underneath?? :shocked: :cool:

I couldn't believe how clean it was under there, especially with 45k now on the clock and 3.5years old  :smiley:

This system is really quiet when tootling around, can't wait till Easter weekend now for the Ring n spa trip and hear it at proper full chat through the tunnels and on track :cool:
Full chat on the roads is license losing territory, apart from the traffic lights blast  :grin:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Nige BCS on 16 March 2013, 14:09
As promised here are a few videos of the Powervalve system on Neil's 6

First up is the car free revving - "Off Boost" so just a nice crisp sports tone similar to stock...

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/th_GolfGTiMK6RevvingOffBoost_zpsdf34a6ee.jpg) (http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/GolfGTiMK6RevvingOffBoost_zpsdf34a6ee.mp4)

The  second video shows the powervalve in car, again running "Off Boost" - nice and relaxed, no boom frequency...

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/th_GolfGTiMK6InCarOffBoost_zps9702e621.jpg) (http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/GolfGTiMK6InCarOffBoost_zps9702e621.mp4)

Finally for some action...
As the driver demands power, everything changes - boost changes the dynamic of the Powervalve system and we get that glorious Sports tone  :grin: - then as soon as the power demand lifts everything immediately calms down again...

(http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/th_GolfGTiMK6InCarBoosting_zps5f3e9474.jpg) (http://i66.photobucket.com/albums/h269/nigeblueflame/VW/Golf%20GTi%20MK6/GolfGTiMK6InCarBoosting_zps5f3e9474.mp4)

Thanks for looking
Nige  :cool:
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Ess_Three on 16 March 2013, 16:22
Ooh...I like the look and sound of that!
Good work Nige  :grin:
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Neil gti on 16 March 2013, 18:46
A quick shot after the milltek was removed and before the BCS was fitted

(http://i601.photobucket.com/albums/tt94/NeilGti/5E6DDDAD-D3AE-4E3E-B8F1-9961F905EE1F-5108-0000059250D03CD8_zps45268452.jpg)
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Ginge 35Edition on 16 March 2013, 19:53
Very nice mate.
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Neil gti on 16 March 2013, 20:11
Just want to say that's not me driving in the videos  :whistle:
I have mastered how to get the power down 100% even on wet roads  :smiley:
When I dropped a couple of gears today and overtook a car the mrs asked me if the exhaust was blowing  :grin: :grin: I just said no it's always been like that  :grin:
If only she knew what I've done to the mk6 lol
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Ginge 35Edition on 16 March 2013, 20:21
Just want to say that's not me driving in the videos  :whistle:
I have mastered how to get the power down 100% even on wet roads  :smiley:
When I dropped a couple of gears today and overtook a car the mrs asked me if the exhaust was blowing  :grin: :grin: I just said no it's always been like that  :grin:
If only she knew what I've done to the mk6 lol

That's ace! Wonder if they have a 35 version planned?
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Neil gti on 16 March 2013, 20:30
Just want to say that's not me driving in the videos  :whistle:
I have mastered how to get the power down 100% even on wet roads  :smiley:
When I dropped a couple of gears today and overtook a car the mrs asked me if the exhaust was blowing  :grin: :grin: I just said no it's always been like that  :grin:
If only she knew what I've done to the mk6 lol

That's ace! Wonder if they have a 35 version planned?


It's the same system as mine, it will bolt straight onto a KO4
I'm sure Nige will confirm this  :smiley:
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Mr GTD on 16 March 2013, 20:44
That sounds sweet as Neil... :cool:
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Snoopy on 16 March 2013, 21:10
Very nice indeed! And how clean is your car underneath?? :shocked: :cool:
must admit sadly that's the first thing i thought, just how clean it was underneath the plastics shine mine are filthy.
Title: Re: Neil's BCS Powervalve GTi MK6 system Install Images
Post by: Neil gti on 16 March 2013, 21:13
Very nice indeed! And how clean is your car underneath?? :shocked: :cool:
must admit sadly that's the first thing i thought, just how clean it was underneath the plastics shine mine are filthy.

Plenty of driving through heavy rain over the last few weeks, seems to of give it a good bath underneath  :wink:
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Nige BCS on 17 March 2013, 10:31
Just want to say that's not me driving in the videos  :whistle:
I have mastered how to get the power down 100% even on wet roads  :smiley:
When I dropped a couple of gears today and overtook a car the mrs asked me if the exhaust was blowing  :grin: :grin: I just said no it's always been like that  :grin:
If only she knew what I've done to the mk6 lol

That's ace! Wonder if they have a 35 version planned?


It's the same system as mine, it will bolt straight onto a KO4
I'm sure Nige will confirm this  :smiley:

Yes the system will go straight onto the Ed35
Cheers
Nige
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Nige BCS on 10 April 2013, 14:23
Hey guys we're thinking of organising a Spring Group buy for the forum members - is there anyone considering upgrading their system at the moment ?
We will be organising an official thread - so for the moment this is a 'feeler'
Cheers
Nige
www.powervalve.co.uk
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Ginge 35Edition on 10 April 2013, 18:22
Maybe mate, if the deal is right.
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Neil gti on 11 April 2013, 20:39
Been a few weeks now with this system fitted and I have found a problem,
My MPG has dropped considerably due to driving on boost everywhere  :grin:
The raspy growl on boost is so addictive,
This is an awesome bit of kit and if anyone is thinking of joining the upcoming group buy you will not regret it, so quite off boost and no boom whatsoever on motorway driving, put your foot down and all hell lets loose  :cool: :smiley:
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Ginge 35Edition on 11 April 2013, 20:56
Nige - do you do an aluminium tip option as I do like my shiny tail pipes?
Title: Re: Neil's BCS Powervalve GTi MK6 Exhaust system Install Images and Videos
Post by: Neil gti on 27 May 2013, 10:54
I thought i'd finally get a sound clip of the BCS system sound on/off boost, the clip dosn't really do it justice but you'll get the idea  :cool:
Just a shame that on this outing i seem to have blown the turbo ?
Getting it checked out tomorrow only smokes when oil is hot and on boost ?(around 7 mins on vid) so i pressume its getting past the turbo seals
K04 Time then  :smiley:

http://youtu.be/rTZvWslFpSA