GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Scott-R on 01 February 2013, 18:27

Title: Busy day off!
Post by: Scott-R on 01 February 2013, 18:27
Had a day of today so I got to work on my wee golf!

I finally fitted my Forge TIP! All went really well and there is a noticeable difference in the way the boost is acting and holding!

Then I fitted some braided fuel lines and my carbon engine cover I bought from a member of this site!

Then I fitted my front splitter ( gonna leave it on because its black)

Tried my side skirts up against car! (Beautiful fit)

Here's some pics!

(http://i1087.photobucket.com/albums/j462/Zeroooooooooo/B95681F2-57CF-445C-9FF6-B29BC24235FA-10606-00000CEE431E92B0_zps1b86c7e9.jpg)

(http://i1087.photobucket.com/albums/j462/Zeroooooooooo/5F033507-2781-49FE-BBF6-588E78E3D090-10606-00000CEE4AC1306C_zpsa8873509.jpg)

Think next pics posted I will have all my kit on and painted and my wheels all nicely sitting with there spacers and just looking very bling! Ha
Title: Re: Busy day off!
Post by: asboGTI on 01 February 2013, 18:28
Sounds like a good day tbh with you fella and looking good I miss my air blade :( its somewhere on the m25
Title: Re: Busy day off!
Post by: Nino on 01 February 2013, 18:47
looks stunning mate  :cool:
Title: Re: Busy day off!
Post by: SI74 on 01 February 2013, 20:49
Looks good, you can't beat a good days dubbing.
Title: Re: Busy day off!
Post by: jonrandom on 01 February 2013, 21:00
Good work mate, looks sweet :smiley:

Had a day off as well and you cant beat a good days dubbing!  :grin:
Title: Re: Busy day off!
Post by: Scott-R on 01 February 2013, 21:04
Thanks folks! Thinkin of doing something with my inlet. Not sure if I want it shiny tho.. Maybe paint it? Anyone done something apart from polish it?
Title: Re: Busy day off!
Post by: Wayne on 01 February 2013, 21:11
Satin black inlet manifold would look good :smiley:
Title: Re: Busy day off!
Post by: Scott-R on 01 February 2013, 21:14
Blend in with the black around it!
Title: Re: Busy day off!
Post by: Wayne on 01 February 2013, 21:15
Quote from: Scott-R on 01 February 2013, 21:14
Blend in with the black around it!

Yes or polished would look ok.
Title: Re: Busy day off!
Post by: Scott-R on 01 February 2013, 21:17
Rubbing compound then heat resistant satin black?
Title: Re: Busy day off!
Post by: barrym381 on 01 February 2013, 21:18
Quote from: Scott-R on 01 February 2013, 21:04
Thanks folks! Thinkin of doing something with my inlet. Not sure if I want it shiny tho.. Maybe paint it? Anyone done something apart from polish it?
have it powdercoated  :smiley:
(http://i1210.photobucket.com/albums/cc419/barrym381/P22-09-10_01-013.jpg)
(http://i1210.photobucket.com/albums/cc419/barrym381/P22-09-10_01-012.jpg)
Title: Re: Busy day off!
Post by: Scott-R on 01 February 2013, 21:32
Glasgow lad! I'm originally a govan boy ha

Thought about powder coating just some mates had bad experiences!
Title: Re: Busy day off!
Post by: barrym381 on 01 February 2013, 21:34
Quote from: Scott-R on 01 February 2013, 21:32
Glasgow lad! I'm originally a govan boy ha

Thought about powder coating just some mates had bad experiences!
just over the water in partick  :tongue: just depends who you use to do it  :wink:
Title: Re: Busy day off!
Post by: Scott-R on 01 February 2013, 21:41
You go to any meets? I will look into cost as I have a spare inlet to test on!
Title: Re: Busy day off!
Post by: barrym381 on 01 February 2013, 21:44
Quote from: Scott-R on 01 February 2013, 21:41
You go to any meets? I will look into cost as I have a spare inlet to test on!
dont get to many but knockhill gets a few visits a year  :evil: i found the pipe work an stuff so easy to keep clean after having it done on the scoob
Title: Re: Busy day off!
Post by: Wazzzer on 01 February 2013, 22:58
Black inlet mani for me too. There's some pics in my build thread