GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Leebob on 26 January 2013, 10:53

Title: Door handle seals
Post by: Leebob on 26 January 2013, 10:53

Anyone know if and where you can buy these from as im looking at replacing mine but can only find complete handles on the bay?Thanks Lee

Title: Re: Door handle seals
Post by: itavaltalainen on 26 January 2013, 13:48

which ones?

i assume 18 (1H0837209) or 19 (1H0837211B)? vw would have them, only ~2£ ea.


(http://www.vagcat.com/p/B121/837000.png)

Title: Re: Door handle seals
Post by: Leebob on 26 January 2013, 13:53

Yeah there the ones.If I cant find them anywhere else I guess it will have to be the dealers.

Title: Re: Door handle seals
Post by: col-mk3 on 26 January 2013, 14:44

i have to pull my handle's loads to open my door what would i need to sort that?

Title: Re: Door handle seals
Post by: itavaltalainen on 26 January 2013, 16:16

which handle, inside or outside one?

Title: Re: Door handle seals
Post by: col-mk3 on 26 January 2013, 20:39

Quote from: itavaltalainen on 26 January 2013, 16:16

which handle, inside or outside one?

outside

Title: Re: Door handle seals
Post by: itavaltalainen on 27 January 2013, 11:01

Sorry, I can't remember how the outside one hooked up to the central locking block exactly....

To take the handle out you need to undo the top torx screw on the side of the door (i.e. where the lock catch is).
Then you might already see what's gone wrong. If not it's a job of removing the central locking block, part disassemble and clean.... usually having to pull hard means that some of the mechanics are either frozen or seized up.

Title: Re: Door handle seals
Post by: Whimsa on 02 February 2013, 03:23

I had this issue and found it was the spring from the catch that broke. Basically when you pull the handle the catch should spring up so you can just pull the door.

Title: Re: Door handle seals
Post by: col-mk3 on 02 February 2013, 13:29

Quote from: Whimsa on 02 February 2013, 03:23

I had this issue and found it was the spring from the catch that broke. Basically when you pull the handle the catch should spring up so you can just pull the door.

so did youjust put new spring in? and is there part number?