GolfGTIforum.co.uk
General => General discussion => Non-Golf gallery => Topic started by: jonnyturbo on 19 January 2013, 19:50
-
Well after looking for a few weeks now i finally found a low mile Audi S3 Quattro 2009 (59) . The car is in imaculate condition inside and out. It has all the usual S3 refinements . Also has some nice optional extras including The best one a DSG transmisson, Bose sound system , Tyre pressure montior and a ipod dock. I am not a 100% on the standard spec of a S3. But it has cruise control and healight washers heated leather , flat bottomed steering wheel and a few more bits. Sure rhyso will correct me tho. No sat nav but can retrofit that and tbh would rather have the DSG transmisson.
The DSG is an amazing piece of kit espcially when you are using the manual paddle shifts :evil: Power delivery is nice and smooth and plenty of grunt.
Heres some pictures and a usual all comments are welcome...
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0047-1-1_zpsc657b0e9.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0046-1-1_zps48a73176.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0048-1-1_zpsf68618ab.jpg)
-
Im so jelous :laugh: good car that bud. You will have loads of fun in it :wink:
In the best colour too :cool:
-
very very nice, love the colour :cool:
-
Yerh it is my fav colour . I Also love the 2012 Green that they done but they cost mega bucks lol so i am very happy with the blue
-
Awesome stuff mate looks tidy!
-
cheers bud :cool:
-
Very nice choice, enjoy it.
-
Awesome choice, I've been looking at these myself recently! :cool:
-
Jel!!! Much better than the 4 :cool:
-
Jel!!! Much better than the 4 :cool:
Cheers bud
Awesome choice, I've been looking at these myself recently! :cool:
Do it
-
Nice car bud
-
Nice car bud
Cheers wes :grin:
-
One word: awesome
Drove my mates the other day and was amazing as expected jonny your gonna love it rapid muthaf**k*r
-
Very nice - although your number plate's a bit fuzzy :laugh:
Let's see some interior shots!
-
Nice! Awesome bit of kit :afro:
-
Xenons are standard too :nerd:
If you think its quick mow, wait until you remap it :evil:
Welcome to Club Aldi :wink:
-
Beauty!
-
Stunning car
-
God dammit. Looks like this might pip a mk5 r32 to next car once the mk5 gti is ready to go... :)
-
Thanks for the comments everyone.
God dammit. Looks like this might pip a mk5 r32 to next car once the mk5 gti is ready to go... :)
Yerh go for it much nicer inside that the mk5 and more power than a R :wink:
Stunning car
Thanks bud
Beauty!
Thanks
-
Well best update this as haven't done so in a while .
Not done that much but enough to keep me pottering.
Managed to get a few decent days where the weather wasn't crap. So I broke out the cleaning stuff. Gave it the works consisting of full interior valet using some new products.
Zaino leather soft spray cleaner
Zaino leather in a bottle
Spoke to cleanyourcar.co.uk and they recommended the above for leather cleaning / protecting . Leather looks like brand new and smells new lol . Then it was the normal for the interior , poorboys natural look dressing and meguires gold glass.
Results
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0083_zpsa8354dc8.jpg)
Then onto the outside . Bought myself a new jet wash and a new fitting for my snow foam lance. Foamed it washed it with chemical guys bodywash n wax . Dried it then I polished it with menzerna super fine polish then finished off with DoDo Juice Blue velvet wax ( great stuff ).
Here are the results
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMG_20130331_090953_zpse24a6671.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMG_20130331_090404_zps20e99bf8.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMG_20130331_091143_zpse9938e8d.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0076_zps5b609f2d.jpg)
-
Saw this on the bay and thought what the heck its worth a tenner.
Was well impressed with the quality and fittment tbh .
Before
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0089_zps9ce2e56b.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0090_zpsf3e56e8f.jpg)
After
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0091_zps60eef5fc.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0092_zps5205c85a.jpg)
-
So after seening what potential the S3 offers with a stage 1 remap I got booked into R-tech. First off got there and was greeted by Nick and Ben was nice to see them again . Had a good chat and then car went on to the lift for fault finding. No faults found Result .
Then it was on to the rollers to see what it was standard . It made 277bhp and 268 ft lb. Very happy with that . Asked Nick about figures as they more than stock he said that some of the newer tfsi engines are making between 260 and 280 bhp so was happy . He said with my figures been more than stock I should see a lot more mid range power than a car that made close to standard figures. Although the bhp would still be around the same for stage one .
Then stage one was applied to my car whilst on the rollers and it made 302bhp and 356 ft lb . really happy with the outcome. This is the way the car should of came out of the factory power wise. It pins you to your seat now whilst still been extremely smooth.
Was advised by nick to get a uprated dump vale ( G ) type . He said current one still has a strong diaphragm and should be ok for now .
So all in all a fantastic day with good results.
Thanks Nick and Ben at R-tech as always excellent service.
Thanks
-
Well noticed the brake pads where getting low so I decided to replace front and back discs and pads all round . Got a good deal on Pagid discs and pads and they get good reviews online . They are as close to oem as you can get so went with them. Got them fitted and are spot on especially after the remap :wink:
-
Well let the modding begin. After the remap i want more power lol dont we all. So had a dig about and found my self a nice Audi TTS engine cover off a forum member at a good price with all the nessacery hardware to make it fit the S3. So this arrived and i put it away in a safe place for later and started to think about getting parts together to go stage 2+.
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/P1000783_zpsf4b1ca8d.jpg) (http://s534.photobucket.com/user/jonnyturbo2001/media/P1000783_zpsf4b1ca8d.jpg.html)
With the cover sorted i got back on the net and started looking at CAI and the APR fuel pumps.
Really like the revo CAI but i think i am going to go down the ITG route . So thats on my list and will order the intake later this week.
Next month i will just be saving a few bucks and then the following month will be getting a full TBE. Probs go down the Milltek route as had one on the golf and didnt skip a beat. Also will be going for a sports cat as cant be bothered to mess about mot time with a decat. And i am not wanting huge power just stage 2+ will be enough for me . And i have been told that a sports cat will be fine for this.
My plan is to get my TBE fitted at Awesome Gti and try get the APR fuel pump upgrade done whilst there. So hopefully will leave there work shop with TBE and APR fuel pump fitted and i will have already have fitted the CAI. Then drive from there to a hotel for the night and then into R-tech the following day for stage 2+ . WELL THATS THE PLAN LOL. Its just getting all the bits together that takes time
Getting there slowly but surley.
-
Havent i seen you asking about something else on ASN :whistle:
-
Yep u certainly have rhyso but that's hush for now lol need a lot of pennies for that lol
-
Well after lots of research with which cold air intake to go for I am going for the AMD intake . Ordered it yesterday and just waiting for it to turn up . I have chosen the silicone hoses in blue and looks like this
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/CAIGif_zpsf8724e4f.gif)
Main reason for choosing this intake is the fact it uses the cold air from behind the headlight and from the stock intake postion. Along with having the biggest diameter of pipe to the turbo for cold air whilst still keeping the MAF happy . Should look good with the TTS engine cover .
Should look like this when fitted but with blue hoses
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/DSC09473Copy_zps7edee903.jpg)
Then its a milltek TBE but saving the pennies for that lol
All comments welcome
-
A little update...
Well received my AMD cai intake from AMD. First impressions out the box are good. Looks like a solid bit of kit. Didn't realise how big the inside diameter of the pips where lol a whopping 90mm lol.
So on to fitting . firstly stripped the old engine cover and all nesscary pipe work . piece of cake only struggle I had was the clamp on the turbo intake pipe but got there in the end.
Engine bay stripped
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0127_zpsd30eae68.jpg)
Next was to unscrew the MAF sensor from its stock postion
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0126_zps02e6b107.jpg)
Then reinstall it into the new silicone pipe with the new screws supplied.
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0129_zps26de7274.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0132_zps3f0f13ed.jpg)
So with the careful and potentially most expensive bit out the way next was just to fit everything loosely and get it all where I want it . Then just tighten up.
Also new my stock engine cover would we obsolete so purchased a TTS engine cover off a ASN member and installed that at the same time. As i am not a fan of cutting the standard cover to suit the new cai ..Can't believe how easy it was to install the cover. Here are the end results .
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0134_zps2c2ce5ea.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0136_zps22fe35f5.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0137_zps579fe425.jpg)
-
looking good mate, intake looks lovely
-
looking good mate, intake looks lovely
+1 an the best colour too :wink: just like my golf
-
Can you feel any difference? Bet it sounds nice!
-
looking good mate, intake looks lovely
Cheers wes
-
Can you feel any difference? Bet it sounds nice!
Yerh difference was instant although after a couple of hundred miles seems even better
-
So I managed to pick a genuine Audi RS3 front grill up from a member on the Audi forum. Got it home and cleaned it and thourgh the titanium finish would go with my mirrors and finish the front end off nicely .
So here it is standard
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0177_zps809fb1a3.jpg)
Here's the titanium grill fitted
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0184_zps68e76c15.jpg)
Then thought it didn't look right at all so I got it sprayed gloss black and it looks loads better and I am happy with it now
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0198_zpsbb53d322.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0200_zpsaf3bb26b.jpg)
All comments welcome
-
Looks soo good! Why do we need to run front plates!!
-
Looks soo good! Why do we need to run front plates!!
+1 looks nice :smiley: an i got away with no front plate on my mr2 for ages :tongue:
-
Looks soo good! Why do we need to run front plates!!
+1 looks nice :smiley: an i got away with no front plate on my mr2 for ages :tongue:
Hmm not much luck of that up here police HQ is less than 5 miles away lol
-
Looks soo good! Why do we need to run front plates!!
So annoying ano
-
New short pressed fitted
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0005_zps32d11ad0.jpg)
-
Looks soo good! Why do we need to run front plates!!
+1 looks nice :smiley: an i got away with no front plate on my mr2 for ages :tongue:
Hmm not much luck of that up here police HQ is less than 5 miles away lol
:grin: thats miles away the local station is half a mile away from me
-
Lol oh well
-
plate looks better now with some kind of plinth :afro:
-
Postie arrived and he dropped a few goodies off
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0203_zpsa1b4e2ab.jpg)
(http://i534.photobucket.com/albums/ee348/jonnyturbo2001/IMAG0201_zps2866ac80.jpg)
-
I see more power on the horizon...
-
I think you could be right wes lol. :wink:
-
Little update
Well as above its been a busy day today . first off I fitted the new Loba hpfp along with a new can follower. It was a doddle to do and requires no mechanical skill at all.
Next up me and my mate set about fitting the THS fmic. This was easy enough to do just there's a lot of parts that need to come off the car lol.
Didn't take any pictures as once the car was back to getha you can't see nothing lol .
I could notice the difference straight away with the new bigger and less restrictive fmic . throttle response seems better and pick up feels crisper.
My exhaust gets done on the 30th and then mapped on the 1st happy days