GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: golfmk4_cy on 23 December 2012, 16:18

Title: link error or ABS
Post by: golfmk4_cy on 23 December 2012, 16:18

I m using the autoscan faculty from VCDS lite and its booting me out after scanning address 3 with this result

Address 03: ABS Brakes
   Controller: 1J0 907 379 Q
   Component: ABS/EDS 20 IE CAN  0001
   Coding: 13504
   Shop #: WSC 00028
No fault code found.

I have tried scanning the modules individually and comes up with the message  no response from the controller.

I m using a cable bought from ebay.

Any help ? is the problem with the link connection or with my ABS pump ?

Title: Re: link error or ABS
Post by: Rhyso on 23 December 2012, 18:37

Id say link error

It says in what, youve posted that no fault code has been found  :nerd:

What modules have you tried scanning?

Title: Re: link error or ABS
Post by: golfmk4_cy on 23 December 2012, 21:43

I have tried scanning engine module firstly

Title: Re: link error or ABS
Post by: golfmk4_cy on 24 December 2012, 17:24

any help anyone ? ? ?