GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: sexydean123 on 23 December 2012, 14:28

Title: help needed, poorly 20vt novice
Post by: sexydean123 on 23 December 2012, 14:28

hello everyone, i have a silver 2000model golf gti turbo,

i have plugged in a fault code reader and reads no codes ,

i can start the car from cold, drives ok, as soon as i turn it off and restart it, it cuts out,
i try and drive it and its cutting out and back on, almost impossible to move away,

i keep turning it on and off untill it will start with loads of revs, then i have to keep the revs up to move away and sometimes even then it splutters,

hope that makes sense

Title: Re: help needed, poorly 20vt novice
Post by: Nino on 23 December 2012, 16:01

Hmm you tryed cleanin the TB?

Title: Re: help needed, poorly 20vt novice
Post by: sexydean123 on 23 December 2012, 16:02

yes its electric with no cable, i just look it off and cleaned inside, i didnt take the electric part apart tho

Title: Re: help needed, poorly 20vt novice
Post by: sexydean123 on 24 December 2012, 00:54

being curious would a bailey dump valve (dv26) cause this on a arz engine??

Title: Re: help needed, poorly 20vt novice
Post by: Rob Zombie on 24 December 2012, 09:28

Scrap that DV and get a Forge 007p recirc valve or the splitter and run as recirc...