GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: godsANGER on 04 December 2012, 15:02
-
Hi all,
I get the sound when going at low speed so mainly when pulling out of a parking spot or maneuvering the car on the street, the scraping sound kinda sounds like when you catch the front splitter on a curb, the knocking may just be my arb bushers.
Any idea what to look at?
Thanks
Mike
-
could be wheel hitting the coilover when on lock(presuming you have coilovers fitted) if not then arb on driveshaft
-
My guess is also arb on driveshaft, mine is doing the same due to work arb bushes.
I'm running it low enough to just miss the driveshaft normally, but now the bushes are worn it comes into contact when on full lock.
-
could be wheel hitting the coilover when on lock(presuming you have coilovers fitted) if not then arb on driveshaft
yer on coilovers had the same coilovers and wheels for 3 years, its only recently started
-
My guess is also arb on driveshaft, mine is doing the same due to work arb bushes.
I'm running it low enough to just miss the driveshaft normally, but now the bushes are worn it comes into contact when on full lock.
well i have newish Poly bushers but.... i think i put a to long bolt on the clamps but about 5mm but on the other hand the clamps were tigth up, but could this be going enough play to hit the drive shaft?
not gone any lower on the front ether :undecided:
-
little bump
-
just jack the drivers side up mate you will see rub marks on the arb if its hitting if your useing standard arb and drop links its 90% its that rubbing i bought some ajustable droplinks and cut 2cm off the bottom longer part and 1" off the thread to make them shorter stopped it completly for me :cool:
-
Or buy a mk1 TT anti roll bar or anyone that goes under the drive shaft