GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: maxmc2 on 03 December 2012, 10:45

Title: VR6 and switched live
Post by: maxmc2 on 03 December 2012, 10:45

Hi all

Picked up a VR6 yesterday as a project and am scratching my head at the following.

Ive installed a radio only to find that both the perm and switched live of the radio loom on the vehicle are constantly live even when i remove the key.

Consequently im getting 130mA or thereabouts of drain on the battery so this will die over time.

Any reason why the switch live is always live??

When i remove the key from the barrel should it not pop out hence cutting the switched live?

Any help appreciated.

Title: Re: VR6 and switched live
Post by: sharki786 on 03 December 2012, 18:12

i have the same problem, but my alpine turns off when i remove the face & also turns the amp off via the remote wire from the cd player to the amp.

Title: Re: VR6 and switched live
Post by: tweed on 03 December 2012, 18:54

I know you have to swap the power cables round

Title: Re: VR6 and switched live
Post by: MereKat on 03 December 2012, 19:39

I had to swap them round on mine, but i have a faulty ignition switch anyway so switched live is always dead...could be that and previous owner has split the permanent live? (My pioneer needs both permanent and switched to have feeds to work, but the permanent can bridge to the switched on the iso connection)

Title: Re: VR6 and switched live
Post by: maxmc2 on 03 December 2012, 20:10

I'm figuring a faulty ignition switch as both switched and perm live on the cars radio loom are constantly love.

I seem to remember on my gti that when I removed the key the barrel ejected itself slightly but doesn't on my vr6

Title: Re: VR6 and switched live
Post by: CJA321 on 03 December 2012, 22:56

Yeah id defo go an ignition switch