GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Mark b on 02 December 2012, 18:29
-
Am I using the wrong relay should I have a 377 as I've got a 603 (rear wiper) the bottom pic is from my haynes manual
(http://i1276.photobucket.com/albums/y464/mrbarker81/12F5D892-430A-4848-86F7-AD055562CE3C-4592-0000031A4A5BFD2D_zps09bad511.jpg)
-
have they been replaced by anyone before you?
-
Right I've managed to look into it for you, its nothing much to worry about, 377 has a part number of 4B0 955 531 A. VW have since released 2 revisions of this relay, so the list is as follows...
4B0 955 531 A - No 377
4B0 955 531 E - No 603
4B0 955 531 C - No 389
(http://i.imgur.com/wcVVR.jpg)
(http://i.imgur.com/Dgnwf.jpg)
-
To be honest I'm not sure but I think so because when I 1st when to look there were 2 screws missing for the panel
-
Yeah my 603 code ends in a letter E
-
Its all good then mate if its working then I wouldn't worry about it, a lot of cars I'd guess are still running version 'A' if it packed up you'd obviously look for latest version 4B0 955 531 C, its most likely a revision in circuit design/current handling at a guess.
-
Cheers for the info just thought I'd check it as thought it may be a fault with my rear wiper not working just trying to rule things out to get to the problem