GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: hainesz on 28 November 2012, 20:36

Title: quick question mk2 guru's
Post by: hainesz on 28 November 2012, 20:36

will a mk4 golf turbo gear selector and tower (gearbox selector tower part number 02J 301 233 A) fit a mk2 with a 02A gearbox?

someone here must of done this if it is possible

Title: Re: quick question mk2 guru's
Post by: Diamond Hell on 28 November 2012, 21:58

On Dave_iow's Golf we've fitted the G4 shifter, cables and the shift tower on the Golf4 gearbox.

We had to trim a lot off the G4 shifter mech, but that seemed to be OK.  The shifter mech is bolted up at the front on the two studs at the front.  At the back we made a pair of tabs and bolted through the tunnel to 'pinch' the back of the shift mech up.

We had to trim various bits of bracketry out the back of the tunnel, but we didn't need to take a hammer to the tunnel at all.

Title: Re: quick question mk2 guru's
Post by: Mr Blue on 28 November 2012, 22:11

http://mk2vr6.com/board/viewtopic.php?f=62&t=4869