GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Mr Blue on 28 November 2012, 18:40

Title: vr6 heated seats, heating elements - diagram needed
Post by: Mr Blue on 28 November 2012, 18:40

Hello

I am after a diagram for mk3 vr6 highline leather seats. Full loom and heated element loom if possible please.

Do the side bolsters have the heating elements or just the base centre and backs?
I see 4 wires going to the bases and 2 for the backs.


Any info would be great!


Thanks

Title: Re: vr6 heated seats, heating elements - diagram needed
Post by: thai-wronghorse on 29 November 2012, 00:02

I had one bookmarked somewhere,  il try and dig it out tomorrow.

Yeah the elements flap up from the base into the bolsters as well as mine get really warm.

Title: Re: vr6 heated seats, heating elements - diagram needed
Post by: Mr Blue on 29 November 2012, 17:05

Thanks mate. I found one but post it up anyway.  :smiley:

It looks like the elements have heat sensors. Also the side bolster elements are joined to the base elements?


Trying to figure out the issue with a loom and mk2 switch I have. I think the switch is faulty and could repair this one using the insides of a mk3 switch. Just need to see the insides of a mk3 switch now before I purchase one :grin:

When I switch on the drivers side loom via the switch, both relays click.

The left side does not click and I have swapped the relays and still the same.