GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: popleyruss on 26 November 2012, 23:30

Title: con rods
Post by: popleyruss on 26 November 2012, 23:30
Should there be any movement in the conrods when the sumps off ?
Title: Re: con rods
Post by: Jack111 on 27 November 2012, 00:35
depends what u mean
Title: Re: con rods
Post by: Chris. on 27 November 2012, 06:22
no.
Title: Re: con rods
Post by: Ant1981 on 27 November 2012, 07:19
No, the conrods shouldn't be moving with the sump off.

With the sump off, there won't be any oil, so no oil lubrication.

If you're seeing the conrods moving whilst you have the sump off, switch the engine off.
Title: Re: con rods
Post by: popleyruss on 27 November 2012, 07:39
There all bolted up still and 2 of the 4 od them u can move the movement is minimal but i didnt rhink it was wright
What can i do about it just fit new shells ?
Title: Re: con rods
Post by: Chris. on 27 November 2012, 07:47
They'd need checking really
Title: Re: con rods
Post by: shaft69 on 27 November 2012, 11:08
Get a bit side to side just sliding on crank but non if pushing rod up/down.
Title: Re: con rods
Post by: Prawny on 27 November 2012, 11:21


If you're seeing the conrods moving whilst you have the sump off, switch the engine off.

hahahahahahahahaha.

That was genuinely funny, and everybody seems to have missed it! nice one man :)

A fraction of side to side play is normal. Any play up and down is very bad news indeed.
Title: Re: con rods
Post by: popleyruss on 27 November 2012, 11:24


If you're seeing the conrods moving whilst you have the sump off, switch the engine off.

hahahahahahahahaha.

That was genuinely funny, and everybody seems to have missed it! nice one man :)
Lol
Ok cool ill look next time im up the workshop i think its side to side but may just change the bearings anywya
A fraction of side to side play is normal. Any play up and down is very bad news indeed.