GolfGTIforum.co.uk
Model specific boards => Golf mk6 => Topic started by: Stepho on 06 November 2012, 19:50
-
Hi there first post and its a please help
Bought a set of LED tail lamps for my mk6 from German EBay, and have since found they have a different set up for the reverse and fog lamps (on opposite sides). Can these be recoded through VCDS or is it a case of re-wiring the lamps to suit? :smiley:
-
Could be totally wrong but I thought single rear fog lights have to go on the drivers side!! So your European ones will be on the passenger side!
-
As above
Only way to rescue these would be to dismantle the lights and physically swap the reverse and fog lights but I'm not 100% sure you could do this as the lens will be built into the light itself i.e. its not just a bulb/LED to swap?
Worth checking though
-
......if the UK is still in Europe .....the EU specs should be the same :whistle:
-
......if the UK is still in Europe .....the EU specs should be the same :whistle:
But don't we drive on the other side of the road?
-
Yepp....I only think that UK is not really feeling European... :grin:
But indeed you all keep driving on the wrong side :evil:
-
Lol! This could get political, haha!
-
The right, and thus correct, side of the road :huh:
Sorry to add my two-pennies worth :wink:
Red
-
I only think that UK is not really feeling European... :grin:
Too right.
-
I only think that UK is not really feeling European... :grin:
Too right.
Seeing as you went there a big +1!