GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: jammac on 05 November 2012, 20:29

Title: Mk2 driveshaft compatibility?
Post by: jammac on 05 November 2012, 20:29

Hi my mates after a driveshaft for his mk2 driver. Is a Gti driveshaft the same? Straight swop ?

Title: Re: Mk2 driveshaft compatibility?
Post by: Diamond Hell on 05 November 2012, 23:08

Depends on the age of the vehicle IIRC - pre 90 spec = 90mm CVs and 90 spec = 100mm CVs and if memory serves the 100mm CVs are slightly deeper and the driveshafts accordingly different.

Title: Re: Mk2 driveshaft compatibility?
Post by: Metallix on 06 November 2012, 07:59

I thought all years of 1.6L Driver had 90mm   (My H reg Driver had 90mm & was definately 90 spec with CE2 electrics etc.)
Maybe your statement is true for the 1.8L version.

Title: Re: Mk2 driveshaft compatibility?
Post by: Diamond Hell on 06 November 2012, 10:43

Quote from: Metallix on 06 November 2012, 07:59

Maybe your statement is true for the 1.8L version.

I think you may well be right.  90-spec Syncro (effectively a 1.8 Driver front end) definitely has 100mm CVs.

Title: Re: Mk2 driveshaft compatibility?
Post by: jammac on 06 November 2012, 11:34

Oh right it's a g reg which is 89 I think he said the flange is 34mm & Gti is 50mm. Basically he needs the shaft specific to his car and can't use a Gti

Title: Re: Mk2 driveshaft compatibility?
Post by: Diamond Hell on 06 November 2012, 12:11

To confirm you could check on ETKA (sorry, don't have it here) but I think it's likely, from my experiences with driveshafts.... or you could change the flanges on the gearbox.... although that's getting a lot more complicated!!