GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: knobby on 13 July 2005, 23:55

Title: New Cylinder Head Gasket - Run in Period?
Post by: knobby on 13 July 2005, 23:55

Hi Guys

Well i finally fitted my new cylinder head and new gasket.. Any ideas how long i should run this in for.. And what i should and should not do in the run in period.

Cheers

Knobby

Title: Re: New Cylinder Head Gasket - Run in Period?
Post by: richandhazel on 14 July 2005, 05:39

Wouldn't have thought you really need to 'run in'  a head gasket as such. It wouldn't hurt to go easy for the first few hundred miles, basically until you're confident all is ok.

I'm assuming its just the head gasket you replaced or was any head work done?

Title: Re: New Cylinder Head Gasket - Run in Period?
Post by: golfgti818 on 14 July 2005, 23:23

running in is normally only required on bottom end work. When i worked  for mercs we didnt suggest  running  in after head rebuilds just an oil change after 1000 miles and check for noises leaks from head at the same time. If it were me id go easy for a while but if all sounds and feels ok then just drive normally.

Title: Re: New Cylinder Head Gasket - Run in Period?
Post by: knobby on 14 July 2005, 23:33

Ive been taking it easy.. not gonna thrash it till ive done a few hundred miles and an oil change and a flush... Give her some nice new oil!...

Its not running great at the mo.. Think timing might be slight out.. its slow reving and feels sluggish..

Cheers

Knobby!