GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: arran.concept on 21 October 2012, 14:49
-
Having bother with refitting my door trim. I have 5 clips all on and lined up but doesn't seem to go far enough into holes to sit nice and flush :( help can't see how to resolve this problem.
-
if you mean around the sides and bottom then may be one is out of line to the hole as they can move about a bit.
-
From memory there should be 2 different size clips, the 2 outer clips should have smaller bits that go in the hole and the middle three have a bigger bit sticking out to go in the hole. Hope that makes sense
-
3 or 5dr?
front or back?
there are 2 different clips that have different depths i think its the rear ones that have all shallow clips and the front has all but 2 deep clips
sounds like you have all deep clips where you need some shallow ones
-
Sounds right ^^^