GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: mar_k on 10 October 2012, 20:19
-
I haven't scanned the car yet, Its a AUM with fly by wire.
The EPC light is lit and you can't rev the car at all. The throttle pedal doesn't work at all.
I will scan the car tomorrow but does anyone have any ideas?
I am planning to clean the TB
-
wire come out the throttle body?? or the pedal? :undecided:
-
problem found, the ECU is fried, The wires on the bottom 02 sensor have been pulled out so I suspect they have shorted out and fried the ECU.
-
:sad: Doesnt sound good :sad:
-
That can happen unfortunately, i've seen it a few times now. Did you scan for faults? there are a couple of codes that can cause the epc light to come on with no throttle, max torque limit exceeded is one that i remember
-
Yep, I scanned it today
I got ................
accelerator position sensor (g79) signal to high
Lamda sensor (g70) signal to high
-
You got a boost gauge by any chance with the vacuum line coming through the white box under the scuttle?
-
You got a boost gauge by any chance with the vacuum line coming through the white box under the scuttle?
No boost gauge fitted, I have confirmed its the ECU, I got the pedal working by crudely wiring in to ground wires at the pedal and it works so the ECU has fired where the grounds are,
Looking for another AUM ECU now, If anyone has one Pm me a price please