GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: markgti1.8t on 05 October 2012, 19:19
-
hi there what would make the most power of the three turbos and for best acceleration thanks
-
they will all pretty much make the same power tbh with the correct suporting mods ..... ko3s hybrid is more or less a ko4 001 from what i believe :smiley:
-
was talking to a turbo technician and he says he would make me a k03 hybrid for £265 would it be better to go k03s hybrid or just buy a k04-001
-
k03 or k03s hybrid
-
franken turbo o loba k03 rules
-
Depending on the internals likely to get more out of a k03 hybrid than K04-001.
260bhp & 300 ft/lb is possible from a K04-001 with all the right supporting mods
-
what you think the k03 hybrid would reach with all supporting mods
-
this may be of some interest
http://www.golfgtiforum.co.uk/index.php?topic=240429.0
-
if i was to do the k03 hybrid would i need to remap straight way or could the car be driven with standard map
-
K03 and k03s hybrids end up the same thing. K04-001 will see 250-260bhp whilst a hybrid k03 will get 280-300bhp depending on the spec. They can be run on a stick car/map providing you unplug the n75 till its mapped.
-
All sounds dodgy to me mate. A hybrid turbo for 265?
WHAT hybrid is it? You could fit a ko3S comp wheel to a ko3 and it's technically a ko3 hybrid!
Or you could fit a ko4 turbine wheel to a ko3S and call that a ko3S hybrid, although in reality you've created a ko4-001.
Find out exactly what internals he's talking about fitting.
My choice would be a ko3 hotside with k04-023 internals from Littco as they've been proven to make over 280bhp on typical st2 mods.
-
going to talk to the turbo technician tomorrow to get more details on the internals that he would be putting in the k03 hopefully he can do k04-023 internals
-
my choice would be what littco is doing and get some serious power :evil:
-
right been to the turbo technician and gave him a k03 that i got from a scrappy got it for £20 the wheels got play but thats not a problem as its getting the bigger wheel the technician said he can fit a k04 wheel ind 41mm and exd 59mm 6/6 1302003410 what do yous think
-
this is how the cars looking the now (http://i1171.photobucket.com/albums/r542/markb54321/photo9.jpg)
-
right been to the turbo technician and gave him a k03 that i got from a scrappy got it for £20 the wheels got play but thats not a problem as its getting the bigger wheel the technician said he can fit a k04 wheel ind 41mm and exd 59mm 6/6 1302003410 what do yous think
what you think guys
-
right been to the turbo technician and gave him a k03 that i got from a scrappy got it for £20 the wheels got play but thats not a problem as its getting the bigger wheel the technician said he can fit a k04 wheel ind 41mm and exd 59mm 6/6 1302003410 what do yous think
what you think guys
who in glasgow is building the turbo for you :smiley:
-
right been to the turbo technician and gave him a k03 that i got from a scrappy got it for £20 the wheels got play but thats not a problem as its getting the bigger wheel the technician said he can fit a k04 wheel ind 41mm and exd 59mm 6/6 1302003410 what do yous think
what you think guys
who in glasgow is building the turbo for you :smiley:
a place in ibrox said that hes done a lot of k03 hybrids and hes got the the equipment the machining out and balancing as said he's putting in k04 wheel ind 41mm and exd 59mm 6/6 1302003410 thats bigger then the k04-023 from what i can see
-
right been to the turbo technician and gave him a k03 that i got from a scrappy got it for £20 the wheels got play but thats not a problem as its getting the bigger wheel the technician said he can fit a k04 wheel ind 41mm and exd 59mm 6/6 1302003410 what do yous think
what you think guys
who in glasgow is building the turbo for you :smiley:
a place in ibrox said that hes done a lot of k03 hybrids and hes got the the equipment the machining out and balancing as said he's putting in k04 wheel ind 41mm and exd 59mm 6/6 1302003410 thats bigger then the k04-023 from what i can see
whats the name of the place :smiley:
-
cant remember the name will get it tomorrow what you think about the comp wheel hes going to put in
-
cant remember the name will get it tomorrow what you think about the comp wheel hes going to put in
get me a name of the company 1st before i make my mind up as not alot of ppl in glasgow touch turbos :smiley:
-
he's from england lol
-
he's from england lol
doesnt make a difference were he is from its the company you are dealin withs name i asked for :smiley:
-
You need a bigger turbine wheel not compressor! The k03s wheel will flow 250-260bhp its the turbine which is the limiting part! Fitting that big compressor isn't going to be the best option as it still needs something to drive it! A small k03 turbine...
-
so you think the turbo would be on the limit at 260bhp
-
With a k03 turbine I'd be surprised if you got anywhere near 260!