GolfGTIforum.co.uk

General => General discussion => Topic started by: markallen on 24 September 2012, 12:34

Title: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 12:34

Hi my engine management light came on so a friend erased the codes then after a test drive it came back with the following codes. Just wondered if anyone knows the part numbers for these? It's a Mk4 1.8T

P1340 cam shaft position sensor
P0571 brake switch
P0327 knock sensor signal too low
P0501 speed sensor

Thanks for any information given :)

Title: Re: Need help on part numbers please? :/
Post by: Lurky on 24 September 2012, 12:57

Reg?

Title: Re: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 13:18

Quote from: Lurky on 24 September 2012, 12:57

Reg?

X634 REC mate

Title: Re: Need help on part numbers please? :/
Post by: Lurky on 24 September 2012, 13:41

knock sensor- VE369005-Oval block connector without lead
knock sensor - VE369026-Chassis 1JY000001 on Brown oval connector with lead
cam sensor-VE363182
 

all above are cambiare numbers

will try find the others

Title: Re: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 13:54

Thanks mate really appreciate it. cambiare numbers??? :/

Title: Re: Need help on part numbers please? :/
Post by: Lurky on 24 September 2012, 14:23

cambiares the maker of the part any motor factor should be able to crossover the part numbers to what ever make they use

http://www.cambiare-ve.com/search-vehicle.asp?orderby=product_code&orderdirection=ASC&make=Volkswagen&model=Golf&engine=1.8&the_reg=2000&product_type=Brake+Light+Switch (http://www.cambiare-ve.com/search-vehicle.asp?orderby=product_code&orderdirection=ASC&make=Volkswagen&model=Golf&engine=1.8&the_reg=2000&product_type=Brake+Light+Switch)

Title: Re: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 14:29

You my are my hero :grin: if I ever bump into you on a night out there's a beer for you  :laugh:

Title: Re: Need help on part numbers please? :/
Post by: Chris. on 24 September 2012, 14:29

Before going and replacing parts...are they actually at fault?

Can get you the proper numbers if you want.

Title: Re: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 14:56

They came up on a machine plugged into the pink ecu slot near the ash tray?

Title: Re: Need help on part numbers please? :/
Post by: Chris. on 24 September 2012, 15:00

They are your fault code numbers.

Put them into the search here and find out why they were triggered

http://wiki.ross-tech.com/wiki/index.php/Category:Fault_Codes

Title: Re: Need help on part numbers please? :/
Post by: markallen on 24 September 2012, 15:48

I've done that mate thanks. Had my timing belt done last week so could be incorrectly installed. Will have to use a garage I know and trust next time! Saying that it could all be down to the sensors I guess? :/