GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: 67buggers on 24 September 2012, 07:24
-
Ive checked the maintenance section but cant find the answer so hopIng one of you lot will know. Basically i have all lights working on mt head lights apart from the main beam/flashers. When i pull the stalk literally nothing happens, no light on the dash and mo main beam. I have swapped the bulbs but no change. I had a look at the fuses but both seem ok. Am i right in thinking its relay 53? (i tried to tead the wiring guide on here but it melted my eyes) i had exactly the same issue on my old golf and never got to the bottom of it. Running dual chamber GTI lights and i have that bridge thing in place on the relay/fuse board
-
Sounds like it could be the stalk itself :undecided:
-
Is there a way to test that before going down the replacing it route?
-
Find the pins on the switchgear that correspond to the high-beams and get the multimeter on it on continuity mode :smiley:
I wish I could tell you which pins to check but I don't know without fannying around taking mine apart :tongue:
-
Nice one mate I'll have a fiddle later :laugh: