GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: berry9112 on 20 September 2012, 14:55

Title: Replacement wishbones or refurb?
Post by: berry9112 on 20 September 2012, 14:55

Afternoon guys and girls,
Im getting a fairly serious knocking noise from the passenger side front, pretty convinced its the rear bush or balljoint (probably both). Iv been quoted £106+VAT each side, and then £26+VAT a side for the ball joint. And thats not including the R32 rear bushes I want to use. Cant really afford that after paying out on new clutch, cable and release bearing as well as general living.
I dont really want to go after market as they wont be as good quality as genuine, read a few posts about a guy called Tierod69 on Ebay which im thinking about, anyone got experience with these parts?
Failing that I may take the 'bones out, take bushes and ball joints out and replace with new genuine items, wire wool the surface rust, treat and hammerite. Hell of alot cheaper then getting brand new items all round.
What do you guys think?

http://www.ebay.co.uk/itm/VW-GOLF-MK3-VR6-CORRADO-VR6-FRONT-WISHBONE-UPGRADE-C217-/220817910172?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3369c5e99c#ht_1988wt_1163
Link to the tierod69 parts

Title: Re: Replacement wishbones or refurb?
Post by: robo22sri on 20 September 2012, 16:38

A few guys on corrado forum have them wishbones fitted from tierod and all good :)

My brother gets his parts from them to and never had any issues

Do the wish bones yourself, soak all the bolts over night and a big bar job done

Title: Re: Replacement wishbones or refurb?
Post by: berry9112 on 20 September 2012, 16:54

Thats good to hear, i was reading the thread on corrado forum about them actually. Ill be doing them myself anyways. Ill get a message over to the ebay guy next week.
Cheers mate

Title: Re: Replacement wishbones or refurb?
Post by: thai-wronghorse on 20 September 2012, 21:46

Having used B&B components (tierod69) for at least 13 years i can firmly say you have nowt to worry about. Speak to Spencer there and he'll sort you out and is very knowledgeable and friendly.
I was also considering the use of their uprated wishbones on my mk3 when i get the time and money...

Title: Re: Replacement wishbones or refurb?
Post by: VW BUSH on 20 September 2012, 22:02

Cheaper to fit new bushes, but requires more time fitting the new bushes.
Easier to fit new parts complete, so long as you are getting genuine Febi or the like it will not matter who you get them from.
You can weld up the seems a bit for extra stiffness, there is a guide on here somewhere :smiley:

Title: Re: Replacement wishbones or refurb?
Post by: berry9112 on 20 September 2012, 22:32

thai-wronghorse, thats good to hear and it looks like ill be giving him a call next week when pay day comes, appreciate it.
I knew the bushes would be an utter ball bag to fit, I think ill save myself the time and just go new everything. About the seam welds, is this a something you would recommend? or just for peace of mind?
Thanks all

Title: Re: Replacement wishbones or refurb?
Post by: thai-wronghorse on 20 September 2012, 22:43

I thought seam welding the wishbones was only really necessary on mk1's and 2's?

Title: Re: Replacement wishbones or refurb?
Post by: Ess_Three on 21 September 2012, 08:10

Quote from: thai-wronghorse on 20 September 2012, 22:43

I thought seam welding the wishbones was only really necessary on mk1's and 2's?

I know there is no further welding to be done on the Mk3 'Plus' GTI/VR6 bottom arms...maybe the 4 stud stuff is different?