GolfGTIforum.co.uk
Model specific boards => Golf mk6 => Topic started by: Wabbit on 14 September 2012, 21:36
-
All
I have just fitted a 7P6 035 730 F Bluetooth module to my Golf 6 and everything works fine but I cannot view my contacts on the RCD 510. I can view all contacts on the DIS and I can view missed and dialled numbers on the RCD510
Would anyone have any ideas what could be wrong?
thanks
-
Mine displays them all as jibberish on my RCD510, fine on the MFD mind. Mine is a 7P6 035 730 G too.
-
i had to load mine via the MFD.
Have you tried reloading them?
-
I have only tried reloading them from radio.
I will try the mfd tomorrow
-
I assume you mean reloading the phone book? if so yes. I was wondering if its more to do with the phone and how it stores the data. But then the MFD's ok.
-
Doesn't the car read the sim card? If your contacts are on the phone, not the sim, maybe that's your problem.
-
I tried a reload from Mfa and has same result !
I have had no problems before with numbers stored on phone!
-
I tried a reload from Mfa and has same result !
I have had no problems before with numbers stored on phone!
Which phone are u using and what version of the firmware do you have?
-
iPhone 4. Not sure of firmware at moment
-
iPhone 4. Not sure of firmware at moment
I had a few problems with my iPhone. Press and hold the setup button for about ten seconds an it will come up with the firmware version.
When I updated mine it sorted out the major issues. Still have some but they don't really bother me.
-
iPhone 4. Not sure of firmware at moment
I had a few problems with my iPhone. Press and hold the setup button for about ten seconds an it will come up with the firmware version.
When I updated mine it sorted out the major issues. Still have some but they don't really bother me.
Using a Galaxy S2 rather than an I phone. I just figured the RCD510 needs the update.
-
Can you update firmware of the rcd510?
Where can I find this?
-
Can you update firmware of the rcd510?
Where can I find this?
My signature, you'll need steel gonads to do it as they can crash :smiley:
-
Can you update firmware of the rcd510?
Where can I find this?
My signature, you'll need steel gonads to do it as they can crash :smiley:
Thats the RNS mate, he's asking about an RCD, i've never seen anything about updating an RCD cos i could do with my RVC being recalibrated but i don't think that can be done either!! :angry:
-
Oops my bad, should learn to read properly :grin: