GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: cooki on 02 September 2012, 13:49
-
Hi guys.
Has anybody got a picture of this pipe i have shown below fitted please??
(http://i64.photobucket.com/albums/h177/serzlee/Screenshot_2012-09-02-13-41-58.png)
Been told that it replaces pipe 2 and 5 from this diagram but i cant see how it will?also were does the metal connector fit aswell please.
(http://i64.photobucket.com/albums/h177/serzlee/Screenshot_2012-09-02-13-34-27.png)
-
Any help at all guys. Tried to fit this last night to no avail.looks like another length of pipe is needed to go from the Y on this pipe back towards the TIP pipe???
-
doesn't this replace number 5 http://www.ebay.co.uk/itm/SEAT-LEON-CUPRA-1-8T-20V-180-BHP-SILCONE-CRANKCASE-BREATHER-HOSE-AUM-AUQ-/160864074502?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item25743efb06#ht_1988wt_1037
-
Looks like it replaces 11,8,2 to me..........
-
doesn't this replace number 5 http://www.ebay.co.uk/itm/SEAT-LEON-CUPRA-1-8T-20V-180-BHP-SILCONE-CRANKCASE-BREATHER-HOSE-AUM-AUQ-/160864074502?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item25743efb06#ht_1988wt_1037
Yep that certainly looks like it will replace 5 but i was told by creation that the pipe i have will do pipe 2 and 5 but i think they are mistaken. I am waiting for a reply from them.
-
Looks like it replaces 11,8,2 to me..........
You could be right there actualy mate yes.god no's though lol. Im well stuck .
-
better off fitting a catchcan
-
better off fitting a catchcan
+1
-
Wish i had of gone for the catch can now but thort this pipe would be much easiet and cheaper but it isnt going according to plan so far lol.
-
Wish i had of gone for the catch can now but thort this pipe would be much easiet and cheaper but it isnt going according to plan so far lol.
just get a catch can, ive got a ebay job and it all cam to about £35, easy to fit and i dont worry about recirculating bad vacuum :wink:
-
Creation have just got back to me and said that my pipe in question is a moulded pipe that replaces the T piece.
But on consulting an old thread isnt the PCV valve inside the T piece??so in theory i would be removing/by passing tbe pcv valve?
Does this sound right to anybody?
-
it would appear it does bypass it mate as there wont be anywhere for the pcv to fit as for replacing item 5 is there another pipe in with the kit as that will only replace part number 2
-
it would appear it does bypass it mate as there wont be anywhere for the pcv to fit as for replacing item 5 is there another pipe in with the kit as that will only replace part number 2
No other pipe suplied mate so think they have got the wrong idea about this replacing pipe 5 also lol.i only realy need it to replace pipe no2 but im unsure again now as i dont no about bypassing the pcv valve??
-
if you want i'll be having my forge 'Y' pipe off and the 'S' pipe for the lower crank case breather, only done about 300miles, yours for £20 lol had to put it back on due to my catch can being faulty :lipsrsealed:
-
if you want i'll be having my forge 'Y' pipe off and the 'S' pipe for the lower crank case breather, only done about 300miles, yours for £20 lol had to put it back on due to my catch can being faulty :lipsrsealed:
Pm'd u buddy.
What pipe numbers are they please from the diagram on the 1st page i put up??
Obviously the Y pipe is no5 lol.
-
pm'd mate, and it has the part replacement numbers on them :wink:
not bad seeing that i paid alot for them but they made me happy until i tore some of my other pipes and going down the catch can scene
-
pm'd mate, and it has the part replacement numbers on them :wink:
not bad seeing that i paid alot for them but they made me happy until i tore some of my other pipes and going down the catch can scene
I believe they're numbers 5 and 2 I think. It's the upper and lower breather pipes
-
I had this pipe on mine, until I ended up fitting a catch can. The pipe you have bought, is a replacement for 11 and 2 only, the metal tube goes in the end that connects to pipe 5, which you will have to purchase separately. I actually have one for sale, a black one if that is any good?
+ the pcv valve still goes in the end on the T piece of the pipe you have, but not in the bit that goes to the sump. if you see what I mean
-
Thanks for the help guys but still not 100% on this.i have the metal connector to connect to pipe no5 so thsts fine. But at the other end do i replace the t-piece with my new pipe then conect pipe no1 and funny valve no8 in to my new pipe??