GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: AcidicDavey on 23 August 2012, 17:00
-
I've got hold of some new trims and just wondered what screws I should use, at the moment mine are held on by a mix of different screws and pop rivets! It probably sounds like a very stupid question to most but I'm a complete noob :tongue:
-
Cable ties!
-
Blu tac.
-
I set myself up for that didn't I!
-
just weld them on
-
I used a Paslode nail gun on mine.
-
Do it right... TigerSeal :laugh:
-
I've got some bathroom sealant in the lean too, you guys reckon that'll do? It's good stuff!
-
I've got some bathroom sealant in the lean too, you guys reckon that'll do? It's good stuff!
Needs to be something that grips not just seals.
-
I used sikaflex 212fc,you can get it from euro car parts or egay.
Best to get some clamps to hold the trim in place whilst it sets.
Also good to put the tube in hot water prior to use,makes it a little easier to squeeze it out.
Failing that hubba bubba chewing sticks well,smells good too.
-
just go the the dealer...they cost me about 6p each last time I got some
-
Screws, I thought they were all held on with small rivets which you can still buy from the dealers or ebay?
http://www.ebay.co.uk/itm/VW-Golf-MK3-MK2-GTi-Wheel-Arch-Rivits-Rivets-Black-20-/160516353594?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item255f852e3a
-
Screws, I thought they were all held on with small rivets which you can still buy from the dealers or ebay?
http://www.ebay.co.uk/itm/VW-Golf-MK3-MK2-GTi-Wheel-Arch-Rivits-Rivets-Black-20-/160516353594?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item255f852e3a
they are black rivets
-
I don't have a rivet gun :sad:
-
Teeth then. :evil:
-
This was a pointless thread... I can't even get the old bloody wood screws out, why would anyone do this to me?!?
-
Screw extractors or drill?
-
Guess I'll have to, bloody bodgers!
-
gaffer tape maan.