GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: ians on 14 August 2012, 19:10

Title: which dizzy do i use?
Post by: ians on 14 August 2012, 19:10

i've got a mk2 golf gti PB engine digifant, I want to put a mk3 8v AGG engine code bottom end with my head, so can i use my mk2's ECU and which dizzy do I use the mk3's or the mk2's?  :undecided:
anything else i should be thinking about? I've gt both engines side by side so nows a good time to make changes  :smiley:

Title: Re: which dizzy do i use?
Post by: The Mighty Elvi on 14 August 2012, 19:19

MK2's

Title: Re: which dizzy do i use?
Post by: ians on 14 August 2012, 19:22

cool cheers

Title: Re: which dizzy do i use?
Post by: danny_p on 14 August 2012, 23:57

not straight fit tho...

2e one works, fits hole without adapter and has 4 windows for ignition iirc

Title: Re: which dizzy do i use?
Post by: ians on 15 August 2012, 20:36

Right can I get one from the scrappy what year golf would one of them dizzys be on? And just to make doubly sure the 2e will be a straight fit?
Thanks
Ian

Title: Re: which dizzy do i use?
Post by: jmsheahan on 19 August 2012, 21:03

2E will be a straight fit, usual weapon of choice for 2.0 bottom ends.

Will be on early Mk3 Golfs but unsure on exact years. Got mine from eBay, think it was 'retro-ignition' for around £50. Worked a treat on the conversion.

Title: Re: which dizzy do i use?
Post by: ians on 05 September 2012, 16:51

Cheers for that bit of useful info. I'll start looking thanks again  :wink:

Title: Re: which dizzy do i use?
Post by: GolfRich on 05 September 2012, 17:18

Guys im still very new to this,

I've seen mention of '2e2' or '2e3' quite a bit, what does it refer to?