GolfGTIforum.co.uk

General => The garage => Diagnostics - VagCom / VCDS => Topic started by: richw911 on 31 July 2012, 23:04

Title: PDF guide to clock coding
Post by: richw911 on 31 July 2012, 23:04

Thanks to Neil - old_no7: http://www.gwdale.co.uk/other/immo2_to_immo3_install.pdf  :smiley:

Title: Re: PDF guide to clock coding
Post by: old_n07 on 02 August 2012, 19:16

Just to point out that this is for an immo2 to immo3 upgrade not an immo3 swap :afro:

Title: Re: PDF guide to clock coding
Post by: topher on 02 August 2012, 19:28

just as an addition, I always like to run through the output tests on the replacement cluster before doing any coding. Quite often i've been asked to install clusters bought from ebay that turned out to have dead pixels or faulty gauges!

Title: Re: PDF guide to clock coding
Post by: Wazzzer on 02 August 2012, 22:26

I found the output tests the other day, they're quite cool lol