GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: dan2252 on 30 July 2012, 23:21

Title: exhuast down pipe,
Post by: dan2252 on 30 July 2012, 23:21

riight then. my exhuast flexy is blowing very very badly which is making it run very poor also as its just before the lambda so its making it have crazy readings. ive been quoted 150 pounds for a new down pipe as ive been told the welds on my down pipe currently are not very good im currently running a 2,5" powerflow exhuast. does that seem about right or should i just get rid of the exhuast alltogether, ps cars a mk4 agu any advise? what would you do in this situation?

Title: Re: exhuast down pipe,
Post by: lemski on 31 July 2012, 08:19

Buy a decat and pipe of ebay and fit it yourself. Also turbo gasket isn't too expensive from tps so ull be quids in

Title: Re: exhuast down pipe,
Post by: dan2252 on 31 July 2012, 23:31

are they of good quality? :)

Title: Re: exhuast down pipe,
Post by: lemski on 31 July 2012, 23:51

My mates run one for a year no problems. Probally not as good as miltek for instance but not the worst. There 3inch into 2 and 1/2 but can be cut for 3inch fully.

Title: Re: exhuast down pipe,
Post by: Felton on 01 August 2012, 10:06

For a extra 50 odd quid you could get a full 3inch system from turbo back off eBay buddy

Title: Re: exhuast down pipe,
Post by: dom on 01 August 2012, 11:21

Quote from: Felton on 01 August 2012, 10:06

For a extra 50 odd quid you could get a full 3inch system from turbo back off eBay buddy

Agreed, mine is a cheap eBay job & came with decat :wink: