GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: NobbyMk3GTI on 20 July 2012, 16:03

Title: Anyone fitted 20mm hubcentric spacers? any issues
Post by: NobbyMk3GTI on 20 July 2012, 16:03

as title, anyone fitted them, any issues, im running 18s and not too low! cheers

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: golfyste on 20 July 2012, 16:27

Front or back??

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: scarr89 on 20 July 2012, 16:42

How long is a piece of string?

Going to need more info if anyone can help you out. The width of your alloys, the offset, tyre sizes  :rolleyes:

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: NobbyMk3GTI on 20 July 2012, 17:09

225-35-18s and not sure of offset! front and rear

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: scarr89 on 20 July 2012, 17:44

Quote from: NobbyMk3GTI on 20 July 2012, 17:09

225-35-18s and not sure of offset! front and rear

What wheels are they? I imagine they will be ET30 to ET40. 20mm at the rear will be no problem  :wink:

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: dom on 20 July 2012, 18:10

I run 20mm spacers on the rear of mine with 18X8 ET35 wheels.

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: NobbyMk3GTI on 20 July 2012, 18:33

Thanks for help  :smiley:

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: Wayne on 20 July 2012, 22:13

You need to find out your wheel offset as a first step.

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: Dsport on 21 July 2012, 07:16

I run 30mm rear and 25mm front hubsentric the bolt on type, was a bit unsure at first, Had them off twice now to check the torque and they are fine and my wheels are 7.5x18 ET38

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: vwkevgti on 22 July 2012, 10:21

I'm running 225/40/18 wheels are 8j et35 with 20mm on the rear and they rub on the rear it's fully wound down on coilovers

Kev

Title: Re: Anyone fitted 20mm hubcentric spacers? any issues
Post by: dom on 22 July 2012, 10:54

Quote from: dom069 on 20 July 2012, 18:10

I run 20mm spacers on the rear of mine with 18X8 ET35 wheels.

I should probably mention that I ran 225's & they scrubbed with the coilovers all the way down. I swapped to 215's to solve this.