GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: markgti1.8t on 18 July 2012, 21:39

Title: gti turbo project
Post by: markgti1.8t on 18 July 2012, 21:39
hi there

rite im in the process of buying a lot of parts for my golf agu

Bosch 42lb Green Giant Fuel Injectors 440cc

AUDI S3 TT LEON CUPRA R MAF AIR FLOW

k04-001

Silicone Air Intake Induction Hose Pipe

1 x DA-27 High Performance in-line Fuel Pump

will be planing on get the car remapped after i get all parts on the car
what i was wonting to no is would it be ok to run the car with all theses on before the remap as will need to drive car tell i have the extra cash for the map or will i have to wait till just before the remap to put some of the parts on thanks   
Title: Re: gti turbo project
Post by: Dalo Harkin on 18 July 2012, 21:43
injectors and MAF have to go on when mapped/being mapped

pipes are fine, fuel pump will be fine,  i doubt you could run a K04 straight away (or if you an you would have to stay off boost as much as possible  :undecided:
Title: Re: gti turbo project
Post by: barrym381 on 18 July 2012, 21:45
are you sure its an agm engine you have  :undecided:
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 21:47
are you sure its an agm engine you have  :undecided:
sorry agu
Title: Re: gti turbo project
Post by: barrym381 on 18 July 2012, 21:52
are you sure its an agm engine you have  :undecided:
sorry agu

look at tobys old white golf give you an idea of parts you need but dont expect change from 1500quid  :laugh:
Title: Re: gti turbo project
Post by: Wazzzer on 18 July 2012, 21:55
that MAF won't be any good for the AGU. Look for a mk3 VR6 MAF and hybrid them  :wink:
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 21:58
yes i have looked at his posts but

just need to no wont in can put on straight away and have to wait till the remap 
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 22:00
that MAF won't be any good for the AGU. Look for a mk3 VR6 MAF and hybrid them  :wink:

thanks
Title: Re: gti turbo project
Post by: barrym381 on 18 July 2012, 22:04
who is mappin the car for you an have you sorted the exhaust
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 22:10
going to a place in Glasgow A FOR AUDI

i have a 3inch turbo back decat 

Bailey Dump Valve

pipercross viper induction kit

vr6 clutch and g60 flywheel

and catch can

Title: Re: gti turbo project
Post by: Toby on 18 July 2012, 22:18
R tech! It's a must!!

Get the ko4.022 if you do ko4
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 22:26
R tech! It's a must!!

Get the ko4.022 if you do ko4

was thinking of the k04.022 but would have to change the down pipe to wouldn't i dont think there is a r tech in glasgow
Title: Re: gti turbo project
Post by: barrym381 on 18 July 2012, 22:28
R tech! It's a must!!

Get the ko4.022 if you do ko4

was thinking of the k04.022 but would have to change the down pipe to wouldn't i dont think there is a r tech in glasgow
i wouldnt trust many places in glasgow to map my car mate
Title: Re: gti turbo project
Post by: DunnDeal12 on 18 July 2012, 22:29
R tech! It's a must!!

Get the ko4.022 if you do ko4

whats the difference in variations toby?
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 22:38
R tech! It's a must!!

Get the ko4.022 if you do ko4

was thinking of the k04.022 but would have to change the down pipe to wouldn't i dont think there is a r tech in glasgow
i wouldnt trust many places in glasgow to map my car mate

i no 2 people that's got a remap from A FOR AUDI and they sed they where good where's the nearest r tech to glasgow 
Title: Re: gti turbo project
Post by: markgti1.8t on 18 July 2012, 22:40
R tech! It's a must!!

Get the ko4.022 if you do ko4

whats the difference in variations toby?

on the k04-022 is it not a 3 bolt on the down pipe and on the k04-001 is a 4 bolt on the down pipe
Title: Re: gti turbo project
Post by: cullygti on 18 July 2012, 23:29
r-tech are only in leicester mate give nick a ring and ask him who he recomends from up your way for tuning he seems to know the best tuners everywhere  :smiley:
Title: Re: gti turbo project
Post by: Chris. on 18 July 2012, 23:34
Get rid of the dump valve.  You need a forge 007p with uprated spring.
Title: Re: gti turbo project
Post by: barrym381 on 18 July 2012, 23:46
r-tech are only in leicester mate give nick a ring and ask him who he recomends from up your way for tuning he seems to know the best tuners everywhere  :smiley:
he will prob say star performance but i may be wrong  :smiley:
Title: Re: gti turbo project
Post by: cullygti on 18 July 2012, 23:51
r-tech are only in leicester mate give nick a ring and ask him who he recomends from up your way for tuning he seems to know the best tuners everywhere  :smiley:
he will prob say star performance but i may be wrong  :smiley:

yeah im pretty sure he recomends them mate  :smiley: