GolfGTIforum.co.uk
Model specific boards => Golf mk6 => Topic started by: RedHP on 16 July 2012, 19:23
-
Hey boys and girls,
I'm sure that this has been covered before but there are just too many results after using the search function. I realise that I am being lazy but I am now on borrowed time and need to get the issue resolved asap, hence my post.
I had a retrofitted LED with DRL's headlamp set fitted on my GiT 2010, which were purchased from China, but I can't get the correct coding for all lights to work as they should.
1. The DRL's work when in-car light setting on 0 and Auto only, not when on sidelights or even when main beams come on (either via Auto or 'On')
2. When light setting is switched to 'Sidelights', no lights at all come on up front
Can anyone please confirm the correct coding to get the new headlamps to work as they should pretty please.....?
PS Kenneth (KennyGTI), many many thanks for your help so far - you are a diamond geezer :smiley:
Red
-
Regarding the LED DRL's,could you not simply take a 12v feed straight from the battery via a fuse and give them a switched feed,leaving your main beam switched as it was before.The DRL'S would then be on all of the time as they should be.If I'm talking nonsense sorry,just a suggestion.
-
Red
I know it's a long shot but is there any other forums where a user has bought these and installed?
Were there any instructions that came with the lights that we might be able to help decipher?
-
Where are you located?
-
No worries matey.
"2. When light setting is switched to 'Sidelights', no lights at all come on up front"
Thats same as me mate, sidelight selected = no lights on at all. The LEDs became my DRLs, and there is no other bulbs to become your sidelights so nothing will come on.
I'll have another look through other forums. I cannot understand why my code did not work with yours?
-
Have look through this. Seems your not the only one. I am sure you will get it eventually, just a matter of messing about.
http://www.golfmk6.com/forums/showthread.php?t=33377
And another:
Here's a link with some coding instructions at the bottom of the page and I believe that he's using the euroswitch. His is a 2012 and it appears that he didn't have to touch byte 18.
http://www.golfmk6.com/forums/showth...=30007&page=13
He used:
Byte 9 bit 3, 7
Byte 11 bit 7
Byte 12 bit 5, 6
Byte 14 bit 0, 3
Byte 15 bit 2
Byte 17 bit 0
Byte 24 100
Byte 26 (nothing)
Byte 27 bit 2, 5
Good luck.
-
Where are you located?
In the Northants area Doc
-
Kenneth - Ah now I understand why the 'sidelights' don't work !
Ok, but any idea's as to why the DRL's do not work when main headlights are on ??
Thanks, I'll give these bits a go !
Thanks all
Red
-
I cannot help you out there mate. It's a weird one but did read on the other forums that people were having similar issues. Just need to look through the different forums and get to the bottom of it.
-
Im in South Northants if you need some coding help :smiley:
-
^^^^^^^^ the very man that will be able to help you!
-
Im in South Northants if you need some coding help :smiley:
PM'd
-
I have a 2012 Golf Gt DSG which I have fitted an RNS 315 DAB unit (mid 2011), I had a guy with Vag/Com come round and enabled the MFD and the PTT button on the steering wheel, my problem is I still don't have voice control. The internal B/T unit was turned of so that I still have the 9W7 B/T unit under the drivers seat as I was told that I would have a micro phone problem if I kept the 315 internal B/T unit, any help would be much appreciated. Mick
-
I don't think the RNS 310 supports voice control mate so the BT module has to be wired up differently, something to do with joining the mic cable, i had the same issue with my RCD510 but my BT was fitted by a fellow forum member so i'm not sure exactly how to do it :sad: i'm sure someone will be along shortly who can help you out. :wink: