GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Dalo Harkin on 12 July 2012, 07:50
-
how much boost should I be getting?
currently spikes to around 1.1 BAR (roughly 16psi) and then slowly tails off.....
This is only a K03 though
-
http://www.golfgtiforum.co.uk/index.php?topic=236041.0
-
mine is about 16-18 psi....when it is working correctly :wink:
-
Never boosted that high - weak actuator?
I definatley dont have any leaks, no where for it to leak from as ALL been replaced with silicone recently or deleted
-
Mine doesnt unless the engine is under load,
For example flat road in 1st and 2nd would peak around 12-14psi but on a nice hill would peak 16-18psi.
3rd and 4th would peak around the 16-18psi most the time to be honest.
-
Mine doesnt unless the engine is under load,
For example flat road in 1st and 2nd would peak around 12-14psi but on a nice hill would peak 16-18psi.
3rd and 4th would peak around the 16-18psi most the time to be honest.
That sounds a bit more realistic, I am also measuring from when on boost as in 0
idle mine is -8psi, boost is as said above
-
sure on idle mines on -24 or somethin close :lipsrsealed:
-
sure on idle mines on -24 or somethin close :lipsrsealed:
are you agu ko3s or stage 2 aum?
-
its aum but its only stage1 remap :undecided:
-
Mine with a stage 1 map peaks @ 18psi and drops back to around 16psi.
-
Mine doesnt unless the engine is under load,
For example flat road in 1st and 2nd would peak around 12-14psi but on a nice hill would peak 16-18psi.
3rd and 4th would peak around the 16-18psi most the time to be honest.
That sounds a bit more realistic, I am also measuring from when on boost as in 0
idle mine is -8psi, boost is as said above
At idle mine is on 18-20 but that is at the bottom of the boost gauge, if you know what I mean. Not sure if that bit is measured in psi though
-
mine goes like this from bottom to top
-18 -16 -14 -12 -10 -8 -6 -4 - 2 0 +2 +4 +6 +8 +10 (1 bar) +12 +14 +16 +18
so at idle its -8 and peaks to around +12 - +14
-
-8 at idle mine is -20 at idle :undecided:
-
gauges should read in hg when below 0 really
-
gauges should read in hg when below 0 really
Ahh, so it does, I just looked at mine.
-
:wink: