GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: dannydubs on 11 July 2012, 10:38
-
I've brought a R reg gti and think I've mad a mistake
When I brought the car it had 2 ignition barrels one in the footwell which was being used to start the car with its own key And the immobiliser ring from the original ignition had the original key taped to it
And the started fine
I asked the owner and he said that he had the replaced all locks including the new hanging ignition
To try and use one key for whole car as was using different keys for doors etc
Right so what I've done is plugged the original ignition back in which is still in place put the original immobiliser ring back on and tried to start car with orignal key and won't start turns over but doesn't fire up
So I put it back taped original key back to ring plugged second ignition back in Tried to start it again nothing???
So because I've took original key away from the immobiliser could I have decoded the key?
Even tho surly you take you key away from car every day
Dnt no what to do now
Sorry for my crappy explanation
please help or ask me if not understood?
-
Why don't you take the chip out of original key and put in the key?
Sorry but don't know why it's not working now though
Try disconnecting the battery for 10 mins
-
Are you trying to start it with the other key close by
-
Yea should I move the other key away
I dnt get why from just removing the the key away from the Immobiliser
It won't start
-
Yea should I move the other key away
I dnt get why from just removing the the key away from the Immobiliser
It won't start
The other key will be blocking it, seen that happen before.
-
Il give that ago
Is it possible to decode a key??
-
Is it possible to decode a key??
Yes, I think it can be done with vagcom.
-
Sorry I mean is it possible that I could of loses the code in the key I no
The transponder thing in the key is still there
-
Arghh anymore help would be great b4 I burn it
-
pm troublestarter...might be able to help or advise :undecided:
-
Ta just done it
-
what was it?
-
I put a crappy code reader on it and got
00513 engine speed sensor is this the
Crank sensor?
The car has a new crank sensor on so if it's the same
Thing maybe fitted poorly!!