GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Khare on 09 July 2012, 20:48
-
As title. How the hell do you separate the trim from the seatbelt? Only way I see is by cutting it :undecided:
-
un bolt the seatbelt mate is the way
-
Aye 17mm bolt at the bottom needs to come out.
-
But the bottom of the seatbelt is on a slide, the fabric loops back on itself. Do you mean unbolt the side?
Is it the same for the rear trim panels?
-
The bolts that need to come out are down near the floor, then you pull the whole thing through the trim your removing.
-
Remove the seal cover. This will show the 17mm you can undo to slide the hooped end of seat belt over the metal bar.
Did mine last week
-
Nice one guys cheers. Is it the same for the rear seatbelts yeah?
-
Nice one guys cheers. Is it the same for the rear seatbelts yeah?
have to loosen off the rear card, lift it up and you will be able to undo the seatbelt.
-
Awesome. Cheers buddy.
-
no problems. Quite easy once you start dude
-
Yeah hopefully. I was sat in the car trying to figure out whether it was one of them trick like things you get in xmas crackers, where you have two rings or something like that and you have to figure out how to separate them hahaha
-
:grin: :grin:
It's a trick to get the fronts back on without them stwisted :grin: I'm sure you will work it out