GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: spudboy6 on 08 July 2012, 21:48
-
I'm carrying out the manual to electric window conversion .
So far I've got everything to kit the doors up . Door looms . Switches and mirrors / switches ect .
Now need the dash loom have been offered one on here for a good price many thanks but can get it out a local scrappy and have the experience of removal to help learn where it goes on re-fit . I noticed the guides never really say what's needed to get the loom out or give photos ,
So fuse box Down , kick plates by bonnet pull and surrounding bits there I'm good up to here , I saw on the white plugs in the door is seperate black plugs in the rear , do I need to get the WHOLE loom or do I only need to get a few of the needed black individual looms out the back of the white plug ?
And if anyone could point out what else I need to remove would be ever so grateful ,
Thanks guys !
-
Have Remove the loom from doner car now :) bit of a squeeze if you ask me not looking forward to re-fit
-
Easy man.. Just wondering how you got on with this conversion? as im in the same position as you were, ive got all the door looms, mecs, switches and mirrors its just the inside the car bit im struggling with.
Any help you could give me would be grateful, then i can carry on and finish my interior off lol!.
-
Hi mate it's pretty easy actually if you have two sets of hands , you local to oxfordshire I could lend a hand or write you a mini guide up ,