GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: harlemex on 05 July 2012, 17:19

Title: rings
Post by: harlemex on 05 July 2012, 17:19

How do you fit the rings that you can buy to your clocks? I have just broke the clear plastic on my clocks getting them off  :sick: :sad:

Title: Re: rings
Post by: harlemex on 05 July 2012, 17:40

The clear plastic was glued on so really hard to get off without breaking. Any ideas?  :kiss:

Title: Re: rings
Post by: DunnDeal12 on 05 July 2012, 17:43

i think theres a few screws on the back and clips.

Title: Re: rings
Post by: harlemex on 05 July 2012, 17:48

Yep, got that bit. There are two screws and some clips. That splits the clocks in half, but one half of the clocks still has the clear plastic fascia on it. Thats the bit I need to remove.

Title: Re: rings
Post by: Wazzzer on 05 July 2012, 18:27

which ones do you have mate? I squeezed mine through from the back then glued them on  :wink:

Title: Re: rings
Post by: harlemex on 05 July 2012, 20:10

I got the plastic ones. Theres a thought. I see you can squeeze them through, but how do you go about applying the glue?

Title: Re: rings
Post by: Wazzzer on 05 July 2012, 22:12

yeah through from the back then just a tiny bit of superglue in about five areas that will touch when the rings are located then stand there holding the front till it dries lol

Title: Re: rings
Post by: harlemex on 06 July 2012, 12:42

I did the above last night, but my superglue came out a bit fast so I ended up with five pools of it  :laugh:. It took some of the paint off the black paint off too so now I have to find a way of covering the exposed white areas left behind. Any tips??

Title: Re: rings
Post by: Wazzzer on 06 July 2012, 14:41

matt black spray paint  :wink:

Title: Re: rings
Post by: Chris. on 06 July 2012, 19:33

Theres a video of a LED install on youtube.